clientVc4Subrack
LUM-CLIENT-MIB ·
.1.3.6.1.4.1.8708.2.27.2.3.1.1.4
Object
column
LUM-TCSubrackNumber
The number of the subrack where the vc4 is located.
Context
- MIB
- LUM-CLIENT-MIB
- OID
.1.3.6.1.4.1.8708.2.27.2.3.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- clientVc4Entry
- Table
- clientVc4Table
- Siblings
- 14
Values & Constraints
Type Constraints
range: 0..15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clientVc4Index An arbitrary index assigned to each if entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.27.2.3.1.1.1 |
| clientVc4AuAlarmIndicationSignal Alarm indication signal (AIS).
Applicable for SDH/Sonet signal formats.
A: An 'all ones' SDH/Sonet signal is detected.
D: SDH/Sonet signal recovered. | column | Enumeration | .1.3.6.1.4.1.8708.2.27.2.3.1.1.10 |
| clientVc4AuLossOfPointer Loss of pointer detected.
Applicable for SDH/Sonet signal formats.
A: A loss of pointer is detected.
D: SDH/Sonet signal recovered. | column | Enumeration | .1.3.6.1.4.1.8708.2.27.2.3.1.1.11 |
| clientVc4RxSignalStatus The operational state for incoming (RX) signal
of the interface.
down - A fault that would lead to a protection
switch has occurred.
degraded - The s… | column | Enumeration | .1.3.6.1.4.1.8708.2.27.2.3.1.1.12 |
| clientVc4ConcatenationStatus Describes if and how the VC4s are concatenated.
on - Concatenation is used.
off - No concatenation is used.
can be vc3 (STS-1),
vc4 (S… | column | Enumeration | .1.3.6.1.4.1.8708.2.27.2.3.1.1.13 |
| clientVc4PayloadStatus Describes if the VC4/STS3 contains payload.
equipped - VC4/STS3 contains payload.
unequipped - No payload in VC4/STS3. | column | Enumeration | .1.3.6.1.4.1.8708.2.27.2.3.1.1.14 |
| clientVc4ConnectionStatus Shows the name of the client port and
possible subchannel/vc4 that it is connected to
or Unconnected if not connected. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.27.2.3.1.1.15 |
| clientVc4Name The management name of the vc4,
e.g. vc4:1:2:1-2:8 where the first number
indicates sub-rack, the second slot number and
the third/forth are the port numbers. The last
number is t… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.27.2.3.1.1.2 |
| clientVc4Descr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.27.2.3.1.1.3 |
| clientVc4Slot The number of the slot where the vc4 is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.27.2.3.1.1.5 |
| clientVc4TxPort The number of the port where the TX-side of the
vc4 is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.27.2.3.1.1.6 |
| clientVc4RxPort The number of the port where the RX-side of the
vc4 is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.27.2.3.1.1.7 |
| clientVc4Vc4 The id of the vc4/STS3/STS1 within the STM16/OC192 frame. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.27.2.3.1.1.8 |
| clientVc4ObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.27.2.3.1.1.9 |