clientMpoLanesRxPowerLow
LUM-CLIENT-MIB ·
.1.3.6.1.4.1.8708.2.27.2.6.1.1.17
Object
column
LUM-TCFaultStatus
Received power level low threshold exceeded.
Relative to the threshold in the port interface
table.
Applicable for all signal formats.
alarm: The received power level is below the
associated threshold.
ok: The received power level is at least 0.5 dBm
above the threshold.
Context
- MIB
- LUM-CLIENT-MIB
- OID
.1.3.6.1.4.1.8708.2.27.2.6.1.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- clientMpoLanesEntry
- Table
- clientMpoLanesTable
- Siblings
- 16
Values & Constraints
Type Values
1 | ok |
2 | alarm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clientMpoLanesIndex An arbitrary index assigned to each if entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.27.2.6.1.1.1 |
| clientMpoLanesRxSensitivity The lowest power that the receiver is guaranteed
to handle, in units of 0.1 dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.27.2.6.1.1.10 |
| clientMpoLanesRxPowerLevel The received power level in units of 0.1 dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.27.2.6.1.1.11 |
| clientMpoLanesPowerLevelLowRelativeThreshold The lower threshold for received power level in
units of 0.1 dB, relative to the receiver
sensitivity. | column | Integer32 | .1.3.6.1.4.1.8708.2.27.2.6.1.1.12 |
| clientMpoLanesWaveLength The wavelength/frequency associated with the lane.
ch871 means the frequency 187.1 THz.
w1310 means the wavelength 1310 nm.
undefined if no wavelength is applicab… | column | LUM-TCLaneFrequency | .1.3.6.1.4.1.8708.2.27.2.6.1.1.13 |
| clientMpoLanesObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.27.2.6.1.1.14 |
| clientMpoLanesForwardAls Forward Automatic Laser Shut-down. Decides if
laser shutdown of the client should occur when
a defect on the line or remote client is detected.
disabled - The laser… | column | LUM-TCEnableDisable | .1.3.6.1.4.1.8708.2.27.2.6.1.1.15 |
| clientMpoLanesLossOfSignal Loss of signal.
Applicable for all signal formats.
A(ctivation): Active loss of signal HW
indication.
D(e-activation): Inactive loss of signal HW
ind… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.27.2.6.1.1.16 |
| clientMpoLanesName The management name of the Lanes,
e.g. Lane:1:2:1:4 where the first number
indicates sub-rack, the second slot number and
the third is the interface number. The last
number is the… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.27.2.6.1.1.2 |
| clientMpoLanesSubrack The number of the subrack where the lane is
located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.27.2.6.1.1.3 |
| clientMpoLanesSlot The number of the slot where the lane is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.27.2.6.1.1.4 |
| clientMpoLanesIfNo The physical interface number. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.27.2.6.1.1.5 |
| clientMpoLanesLaneId The identity of the lane within the Client frame. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.27.2.6.1.1.6 |
| clientMpoLanesAdminStatus The administrative state for the interface.
down - The interface is de-activated.
service - The interface is activated but alarms are
suppressed. Int… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.27.2.6.1.1.7 |
| clientMpoLanesOperStatus The operational state for the interface.
notPresent - The physical resources are not
available.
down - The interface is de-activated or there are
fau… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.27.2.6.1.1.8 |
| clientMpoLanesLaserStatus The operational state of the laser.
off - The laser is turned off.
on - The laser is turned on. | column | LUM-TCOnOff | .1.3.6.1.4.1.8708.2.27.2.6.1.1.9 |