clientLanesResetBE
LUM-CLIENT-MIB ·
.1.3.6.1.4.1.8708.2.27.2.5.1.1.11
Object
column
r/w
Enumeration
Command to reset the BIP-8 error counter value.
Context
- MIB
- LUM-CLIENT-MIB
- OID
.1.3.6.1.4.1.8708.2.27.2.5.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- clientLanesEntry
- Table
- clientLanesTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | normal |
2 | reset |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clientLanesIndex An arbitrary index assigned to each if entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.27.2.5.1.1.1 |
| clientLanesBE The counter associated with the number of
Bit Interleave Parity errors in a particular lane. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8708.2.27.2.5.1.1.10 |
| clientLanesLossOfSignal Loss of signal.
Applicable for all signal formats.
A(ctivation): Active loss of signal HW
indication.
D(e-activation): Inactive loss of signal HW
ind… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.27.2.5.1.1.12 |
| clientLanesObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.27.2.5.1.1.13 |
| clientLanesLossOfSync Loss of sync.
All forms of sync loss.
A(ctivation): GbE 'frame' can not be located.
D(e-activation): GbE 'frame' is located. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.27.2.5.1.1.14 |
| clientLanesLocalLinkFault Local link fault. IEEE 802.3ah
A(ctivation): Active local link fault indication.
D(e-activation): Inactive local link fault indication. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.27.2.5.1.1.15 |
| clientLanesRemoteLinkFault Remote link fault. IEEE 802.3ah
A(ctivation): Active remote link fault indication.
D(e-activation): Inactive remote link fault indication. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.27.2.5.1.1.16 |
| clientLanesHighBitErrorRate High bit error rate (Hi-Ber). IEEE 802.3ah
A(ctivation): Active high bit error rate.
D(e-activation): Inactive high bit error rate. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.27.2.5.1.1.17 |
| clientLanesReceiverSensitivity The lowest power that the receiver is guaranteed
to handle, in units of 0.1 dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.27.2.5.1.1.18 |
| clientLanesReceivedPowerLow Received power level low threshold exceeded.
Relative to the threshold in the port interface
table.
Applicable for all signal formats.
alarm: The received power lev… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.27.2.5.1.1.19 |
| clientLanesName The management name of the Lanes,
e.g. Lane:1:2:1:4 where the first number
indicates sub-rack, the second slot number and
the third is the interface number. The last
number is the… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.27.2.5.1.1.2 |
| clientLanesIfNo The physical interface number. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.27.2.5.1.1.20 |
| clientLanesIdx Internal object reference | column | Integer32 | .1.3.6.1.4.1.8708.2.27.2.5.1.1.21 |
| clientLanesClientIfIdx Internal object reference of the clientIf | column | Integer32 | .1.3.6.1.4.1.8708.2.27.2.5.1.1.22 |
| clientLanesAdminStatus The administrative state for the interface.
down - The interface is de-activated.
service - The interface is activated but alarms are
suppressed. Int… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.27.2.5.1.1.23 |
| clientLanesOperStatus The operational state for the interface.
notPresent - The physical resources are not
available.
down - The interface is de-activated or there are
fau… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.27.2.5.1.1.24 |
| clientLanesUpPortId Internal port reference for traffic unit. | column | Integer32 | .1.3.6.1.4.1.8708.2.27.2.5.1.1.25 |
| clientLanesSubrack The number of the subrack where the lane is
located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.27.2.5.1.1.3 |
| clientLanesSlot The number of the slot where the lane is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.27.2.5.1.1.4 |
| clientLanesTxPort The number of the port where the TX-side of the
lane is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.27.2.5.1.1.5 |
| clientLanesRxPort The number of the port where the RX-side of the
lane is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.27.2.5.1.1.6 |
| clientLanesLaneId The id of the lane within the Client frame. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.27.2.5.1.1.7 |
| clientLanesRxPowerLevel The received power level in units of 0.1 dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.27.2.5.1.1.8 |
| clientLanesWaveLength The wavelength/frequency associated with the lane.
ch871 means the frequency 187.1 THz.
w1310 means the wavelength 1310 nm.
undefined if no wavelength is applicab… | column | LUM-TCLaneFrequency | .1.3.6.1.4.1.8708.2.27.2.5.1.1.9 |