operationSupport

LSI-megaRAID-SAS-IR-MIB · .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.23
MIB view Table view

Object

column optional RFC1213-MIBDisplayString 
Online,Offline,Failed,Bad,Uncofigured good,Unconfigured bad,
Spare,Spare,replaceMissing,markMissing,startRebuild,stopRebuild,
locate,stopSecureEraseNonSED,FWDownloadAllowed

Context

MIB
LSI-megaRAID-SAS-IR-MIB
OID
.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.23
Type
column
Access
readonly
Status
optional
Parent
pdEntry
Table
pdTable
Siblings
39

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pdIndex optional
The unique ID
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.1
pdState optional
Firmware's interpretation of drive state. Values: unconfigured_good(0), unconfigured_bad(1), hot_spare(2), offline(16), failed(17), rebuild(20), online(24),copyback(32),system(64)
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.10
disabledForRemoval optional
If true, drive is ready for removal. Values: false(0), true(1)
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.11
linkSpeed optional
Negotiated link speed. Values: speed_unknown(0), speed_1p5G(1), speed_3G(2), speed_6G(3)
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.12
pdSupportFlags optional
1st Byte:forcedPDGUID(0/1),2nd Byte:inVD(0/1),3rd Byte:isGlobalSpare(0/1),4th Byte:isSpare(0/1),5th Byte:isForeign(0/1),6th Byte:intf(0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-…
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.13
pdSasAddr optional
Device SAS addresses. Comma separeted for multiple address
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.14
rawSize optional
Size(MB) before COD and coercion
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.15
nonCoercedSize optional
Size(MB) after COD is reserved but before coercion
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.16
coercedSize optional
Size(MB) after COD is reserved and after coercion
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.17
enclDeviceId optional
Enclosure's device Id (in decimal); if device is not within enclosure value is -1
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.18
enclIndex optional
Firmware internal enclosure index
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.19
physDevID optional
The Device ID
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.2
slotNumber optional
Slot number of this drive, if this Physical Drive is an enclosure then -1
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.20
pdOperationProgress optional
% Progress is %. e.g. Rebuild progress is 10%
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.21
pdAdpID optional
Controller id where this Physical Drive is attached
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.22
vendorID optional
Vendor ID
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.24
productID optional
Product ID
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.25
pdFwversion optional
Physical drive firmware version
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.26
pdSerialNumber optional
Physical drive serial number
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.27
diskType optional
Type of the disk : 0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.28
partnerDevId optional
If drive is in an enclosure with dual paths,This is Partner Device ID. In all other cases INVALID(-1)
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.29
oemSupported optional
Drive support by the OEM (OEM-specific checks) Values: notSupported(1), supported(0)
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.3
mediatype optional
Media Type HDD(0),SSD(1)
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.30
oemCertified optional
Indicates whether device is certified(0) or not(1)
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.31
pdTemperature optional
Physical Drive temperature in Celsius
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.32
piType optional
SAS Protection Information Type .No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Type 3(3) ,Reserved SAS PI Type 4(4) ,Reserved SAS PI Type 5(5) ,Reserv…
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.33
userDataBlockSize optional
Number of bytes of user data in LBA
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.34
cage optional
Current Cage that holds the SSD
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.35
location optional
Current location of SSD 0 - Upper, 1 - Lower
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.36
whtemperature optional
Temperature of each SSD
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.37
flashType optional
Flash Type being used (SLC / MLC / EMLC)
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.38
lifeCurveStatus optional
100 - No throttling being done, 90 - SSD is being throttled
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.39
scsiDevType optional
Type of this Device. Values: disk(0), tape(1), printer(2), processor(3), cdrom(5), scanner(6), optical(7), enclosure(13), dvd(10), unknown(31)
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.4
sSDLifeLeft optional
Percentage of SSD life left
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.40
connectedAdapterPort optional
Adapter port to which the device is connected.
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.5
deviceSpeed optional
Maximum supported speed. Values: speed_unknown(0), speed_1p5G(1), speed_3G(2),speed_6G(3)
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.6
mediaErrCount optional
Error count of the device
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.7
otherErrCount optional
other error count of the device
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.8
predFailCount optional
Predictive fail count of the device
columnInteger32.1.3.6.1.4.1.3582.5.1.4.2.1.2.1.9