sasAddr

LSI-MegaRAID-SAS-MIB · .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.14
MIB view Table view

Object

column optional RFC1213-MIBDisplayString 
Device SAS addresses. Comma separeted for multiple address

Context

MIB
LSI-MegaRAID-SAS-MIB
OID
.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.14
Type
column
Access
readonly
Status
optional
Parent
physicalDriveEntry
Table
physicalDriveTable
Siblings
47

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pdIndex optional
The unique ID
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.1
pdState optional
Firmware's interpretation of drive state. Values: unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64),UNCON…
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.10
disabledForRemoval optional
If true, drive is ready for removal. Values: false(0),true(1)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.11
linkSpeed optional
Negotiated link speed. Values: speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.12
pdSupportFlags optional
1st Byte:forcedPDGUID(0/1),2nd Byte:inVD(0/1),3rd Byte:isGlobalSpare(0/1),4th Byte:isSpare(0/1),5th Byte:isForeign(0/1),6th Byte:intf(0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-…
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.13
rawSize optional
Size(MB) before COD and coercion
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.15
nonCoercedSize optional
Size(MB) after COD is reserved but before coercion
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.16
coercedSize optional
Size(MB) after COD is reserved and after coercion
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.17
enclDeviceId optional
Enclosure's device Id (in decimal); if device is not within enclosure value is -1
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.18
enclIndex optional
Firmware internal enclosure index
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.19
physDevID optional
The Device ID
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.2
slotNumber optional
Slot number of this drive, if the Physical Disk is part of an enclosure then -1
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.20
operationProgress optional
Operation progress in %. e.g. Rebuild progress is 10%
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.21
adpID-PDT optional
Controller id where this Physical Drive is attached
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.22
operationSupport optional
MakeOnline,MakeOffline,MakeFailed,MakeBad,MakeUncofigured, MakeSpare,RemoveSpare,replaceMissing,markMissing,startRebuild, stopRebuild,locate,pdclear,foreignImportNotAllowed,Foreig…
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.23
pdVendorID optional
Vendor ID
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.24
pdProductID optional
Product ID
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.25
pdFwversion optional
PD firmware version
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.26
diskType optional
Type of the disk : 0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.27
partnerDevId optional
If drive is in an enclosure with dual paths,This is Partner Device ID. In all other cases INVALID(-1)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.28
mediatype optional
Media Type HDD(0),SSD(1),Solid state flash module(2)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.29
oemSupported optional
Is the drive supported by the OEM (OEM-specific checks). Values: notSupported(1), supported(0)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.3
powerState optional
Power condition of the device. Values are device is active(0),device is stopped(1),device is transitioning between power states(255)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.30
secured optional
1=drive is secured, 0=not secured
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.31
locked optional
1=drive is locked, 0=unlocked
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.32
foreign optional
1=drive is secured by a foreign lock key, 0=drive is not secured by a foreign lock key
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.33
oemCertified optional
Is the drive certified by the OEM (OEM-specific checks). Values: notCertified(1), Certified(0)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.34
foreignImportNotAllowed optional
1=Drive is not allowed foreignImport operation, 0=Drive is allowed foreignImport operation
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.35
pdTemperature optional
Physical Drive temperature in Celsius
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.36
pdSerialNumber optional
Physical Drives serial number
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.37
piEligible optional
Protection Information eligibility.1=drive can be used for PD Enabled LD , 0=drive can't be used for PD Enabled LD
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.38
piType optional
SAS Protection Information Type .No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Type 3(3) ,Reserved SAS PI Type 4(4) ,Reserved SAS PI Type 5(5) ,Reserv…
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.39
scsiDevType optional
Type of this Device. Values: disk(0),tape(1),printer(2),processor(3),cdrom(5),scanner(6),optical(7),enclosure(13),dvd(10),unknown(31)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.4
piFormatted optional
formatted for PI information. 1=drive is formatted for PI information, 0=no PI data.
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.40
userDataBlockSize optional
Number of bytes of user data in LBA
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.41
commissionedSpare optional
Yes = this PD is a commissioned spare, No = this PD is not a commissioned spare.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.42
emergencySpare optional
Eligible = this PD is a emergency spare, Ineligible = this PD is not a emergency spare.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.43
shieldCounter optional
How many times the shield diagnostics was run before it was marked failed
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.44
shieldDiagCompletionTime optional
Last successful Diagnostics completion time. 0 is N/A
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.45
ineligibleForSSCD optional
Whether PD cannot be used for an SSCD. PD can not be used for an SSCD(1), PD can be used for an SSCD(0)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.46
ineligibleForLd optional
Whether PD cannot be used for a regular LD. PD can not be used for a regular LD(1), PD can be used for a regular LD(0)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.47
serviceable optional
Whether PD is removeable for service. PD is removeable for service(1), PD is not removeable for service(0)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.48
connectedAdapterPort optional
Adapter port(s) to which the device is connected.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.5
deviceSpeed optional
Maximum supported speed. Values: speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3)
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.6
mediaErrCount optional
Error count of the device
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.7
otherErrCount optional
Other error count of the device
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.8
predFailCount optional
Predictive fail count of the device
columnInteger32.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.9