enablePI
LSI-MegaRAID-SAS-MIB ·
.1.3.6.1.4.1.3582.4.1.4.1.2.1.45
Object
column
optional
Integer32
1 = Enable SAS PI for controller , 0 = Disable SAS PI for controller
Context
- MIB
- LSI-MegaRAID-SAS-MIB
- OID
.1.3.6.1.4.1.3582.4.1.4.1.2.1.45- Type
- column
- Access
- readonly
- Status
- optional
- Parent
- adapterPropertiesEntry
- Table
- adapterPropertiesTable
- Siblings
- 62
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adapterID-APT optional AdapterID for this Adapter.(Unique) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.1 |
| patrolReadRate optional Patrol Read Rate for this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.10 |
| bgiRate optional Background initialization rate for this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.11 |
| spinupDelay optional Number of seconds to delay among spinup groups for this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.12 |
| spinupDriveCount optional Maximum number of drives to spin up at one time for this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.13 |
| coercionMode optional Drive capacity coercion mode. 0->None; 1->128MB; 2->1GB | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.14 |
| nvramSize optional NVRAM size in KB for this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.15 |
| memorySize optional Memory size in MB for this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.16 |
| flashSize optional Flash size in MB for this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.17 |
| vdPresentCount optional Virtual devices present in this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.18 |
| vdDegradedCount optional Number of virtual devices in this adapter that are critical | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.19 |
| rebuildRate optional Rebuild rate on this Adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.2 |
| vdOfflineCount optional Number of virtual devices in this adapter that are offline | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.20 |
| pdPresentCount optional Physical devices present in this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.21 |
| pdDiskPresentCount optional Physical disk devices present in this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.22 |
| pdDiskPredFailureCount optional Number of disk devices in this adapter that are critical | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.23 |
| pdDiskFailedCount optional Number of disk devices in this adapter that are failed | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.24 |
| ccRate optional Consistency Check rate on this Adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.25 |
| compatibilityFlag optional To inform compatibilities between Applications and FW. 0->incompatible; 1->compatible | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.26 |
| compatibilityInfo optional Compatibility Information. Format->(Firmware Forward compatibility flag:Firmware Backward compatibility flag:Firmware version flag:Application Forward compatibility flag:Applicati… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.1.2.1.27 |
| abortCConError optional Abort CC on detecting error is enabled or disabled on this adapter.
Values: No(0),Yes(1),NA(2) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.28 |
| copyBackState optional CopyBack is enabled or disabled on this adapter.Values: disabled(0),enabled(1) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.29 |
| reconstructionRate optional Reconstruction rate on this Adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.3 |
| revisionIdentifier optional Board revision ID for this Adapter. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.1.2.1.30 |
| multipathSupport optional Multipath is supported or not supported on this adapter.Values: not supported(0),supported(1) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.31 |
| ssdSMARTerEnabled optional Copyback to SSD on SMART error. Values Enabled(0),Disabled(1) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.32 |
| enableSpinDownUnconfigured optional Spin Down Unconfigured Drives(1), Do Not Spin Down Unconfigured Drives(0) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.33 |
| disableSpinDownHotSpare optional Spin Down Hotspares(0), Do Not Spin Down Hotspares(1) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.34 |
| spinDownTime optional SpinDownTime in minutes | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.35 |
| spinupEnclDriveCount optional Maximum number of drives that can be spin up in an enclosure | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.36 |
| spinupEnclDelay optional Delay between drive spin up for drives within an enclosure | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.37 |
| defaultLdPSPolicy optional power saving policy.values:controller default power saving policy=0, AUTO=1, MAX=2, Max with no cache=6, NONE=255 | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.38 |
| disableLdPSInterval optional LD power savings are disabled for yy hours beginning at disableLdPSTime. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.39 |
| alarmState optional Alarm is enabled or disabled on this adapter. Values: disabled(0),enabled(1) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.4 |
| disableLdPSTime optional LD power savings shall be disabled at xx minutes from 12:00am. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.40 |
| supportBreakMirror optional 1=Support break mirror operation,0=Do not Support break mirror operation | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.41 |
| temperatureROC optional temperature of RAID On Chip in Celsius | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.42 |
| temperatureCtrl optional temperature of controller in Celsius | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.43 |
| preventPIImport optional 1=Prevent import of SAS PI protected logical disks , 0=Not Prevent import of SAS PI protected logical disks | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.44 |
| totalSpaceformetadata optional Total Space used for MetaData | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.46 |
| useEmergencySpare optional This field give the information about Emergency Spare possible Drive types(Uncongiured Good/Global Hotspare) | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.1.2.1.47 |
| useEmergencySparesforSMARTer optional 1 = Use Emergency spares for SMARTer ,0 = Not Use Emergency spares for SMARTer | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.48 |
| supportShieldState optional 1 =Support PD shield state ,0 = Not Support PD shield state | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.49 |
| cacheFlushInterval optional Cache flush interval in seconds for this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.5 |
| writeCacheCapable optional 1 = SSC support write caching IOs ,0 = SSC not support write caching IOs | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.50 |
| totalCacheSize optional This field give the information about total Size of currently configured SSC,in GB | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.51 |
| maximumCacheSize optional This field give the information about maxmium Size of SSC that can yet be configured,in GB | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.52 |
| ctrlSasAddr optional This field gives the controller SAS address | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.1.2.1.53 |
| domainId optional This field gives the Domain ID | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.1.2.1.54 |
| peerControllerStatus optional This field gives the Peer controller Status | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.1.2.1.55 |
| maximumControllerNodes optional This field gives the HA nodes this FW supports | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.56 |
| incompatibilityDetails optional This field gives the Incompatibility Details | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.1.2.1.57 |
| topologyType optional This field gives the Topology Type | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.1.2.1.58 |
| supportOnlineFWUpdate optional 1 = Online firmware update is supported, 0 = Online firmware update is not supported | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.59 |
| clusterState optional Cluster is enabled or disabled on this adapter. Values: disabled(0),enabled(1) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.6 |
| supportFastPathWB optional 1 = Support Fast Path WB on Raptor Type Ld ,0 = Does not support Fast Path WB on Raptor Type Ld | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.60 |
| supportConfigAutoBalance optional 0 = no configuration auto balance support, 1 = configuration auto balance support is present | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.61 |
| maintenanceMode optional 1=FW supports maintenance mode | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.1.2.1.62 |
| disableLargeIO optional 0 = Large IO is supported, 1 = Large IO is unsupported | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.63 |
| predFailPollInterval optional Number of seconds between precdictive fail polls on this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.7 |
| intThrottleCount optional Interrupt throttle active count on this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.8 |
| intThrottleTimeUs optional Interrupt throttle completion hold time on this adapter. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.1.2.1.9 |