lmpCcHelloDeadIntervalDefault
LMP-MIB ·
.1.3.6.1.2.1.10.227.1.7
Object
scalar
r/w
LmpInterval
This object specifies the default HelloDeadInterval parameter to use in the Hello protocol keep-alive phase. It indicates how long a device should wait before declaring the control channel dead. The HelloDeadInterval parameter should be at least three times the value of HelloInterval. It is used as a default value for lmpCcHelloDeadInterval. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot.
Context
- MIB
- LMP-MIB
- OID
.1.3.6.1.2.1.10.227.1.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- lmpObjects
- Siblings
- 22
Syntax
LmpInterval
- Source
- LmpInterval
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 1..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lmpAdminStatus The desired operational status of LMP on the node.
Implementations should save the value of this object in
persistent memory so that it survives restarts or reboot. | scalar | Enumeration | .1.3.6.1.2.1.10.227.1.1 |
| lmpControlChannelTable This table specifies LMP control channel information. | table | - | .1.3.6.1.2.1.10.227.1.10 |
| lmpControlChannelPerfTable This table specifies LMP control channel performance
counters. | table | - | .1.3.6.1.2.1.10.227.1.11 |
| lmpTeLinkTable This table specifies the LMP-specific TE link information.
Overall TE link information is kept in three separate tables:
ifTable for interface-specific information, lmpTeLinkTable… | table | - | .1.3.6.1.2.1.10.227.1.12 |
| lmpGlobalLinkVerificationInterval This object indicates how often the link verification
procedure is executed. The interval is in milliseconds.
A value of 0 is used to indicate that the link
verification procedur… | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.227.1.13 |
| lmpLinkVerificationTable This table specifies TE link information associated with the
LMP verification procedure. | table | - | .1.3.6.1.2.1.10.227.1.14 |
| lmpTeLinkPerfTable This table specifies LMP TE link performance counters. | table | - | .1.3.6.1.2.1.10.227.1.15 |
| lmpDataLinkTable This table specifies the data-bearing links managed by the
LMP. | table | - | .1.3.6.1.2.1.10.227.1.16 |
| lmpDataLinkPerfTable This table specifies the data-bearing links LMP performance
counters. | table | - | .1.3.6.1.2.1.10.227.1.17 |
| lmpNotificationMaxRate The LMP notification rate depends on the size of the network,
the type of links, the network configuration, the
reliability of the network, etc.
When this MIB was desig… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.227.1.18 |
| lmpLinkPropertyNotificationsEnabled If this object is true(1), then it enables the
generation of lmpTeLinkPropertyMismatch
and lmpDataLinkPropertyMismatch notifications;
otherwise, these notifications are not emitte… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.227.1.19 |
| lmpOperStatus The actual operational status of LMP on the node. | scalar | Enumeration | .1.3.6.1.2.1.10.227.1.2 |
| lmpUnprotectedNotificationsEnabled If this object is true(1), then it enables the
generation of lmpUnprotected notifications;
otherwise, these notifications are not emitted.
Implementations should save the value of… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.227.1.20 |
| lmpCcUpDownNotificationsEnabled If this object is true(1), then it enables the generation of
lmpControlChannelUp and lmpControlChannelDown notifications;
otherwise, these notifications are not emitted.
Implement… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.227.1.21 |
| lmpTeLinkNotificationsEnabled If this object is true(1), then it enables the
generation of lmpTeLinkDegraded and lmpTeLinkNotDegraded
notifications; otherwise, these notifications are not emitted.
Implementati… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.227.1.22 |
| lmpDataLinkNotificationsEnabled If this object is true(1), then it enables the
generation of lmpDataLinkVerificationFailure
notification; otherwise, these notifications are not emitted.
Implementations should sa… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.227.1.23 |
| lmpNbrTable This table specifies the neighbor node(s) to which control
channels may be established. | table | - | .1.3.6.1.2.1.10.227.1.3 |
| lmpCcHelloIntervalDefault This object specifies the default value for the HelloInterval
parameter used in the Hello protocol keep-alive phase. It
indicates how frequently LMP Hello messages will be sent. … | scalar | LmpInterval | .1.3.6.1.2.1.10.227.1.4 |
| lmpCcHelloIntervalDefaultMin This object specifies the default minimum value for the
HelloInterval parameter. It is used as a default value
for lmpCcHelloIntervalMin. Implementations should save the
value o… | scalar | LmpInterval | .1.3.6.1.2.1.10.227.1.5 |
| lmpCcHelloIntervalDefaultMax This object specifies the default maximum value for the
HelloInterval parameter. It is used as a default value
for lmpCcHelloIntervalMax. Implementations should save the
value o… | scalar | LmpInterval | .1.3.6.1.2.1.10.227.1.6 |
| lmpCcHelloDeadIntervalDefaultMin This object specifies the default minimum value for the
HelloDeadInterval parameter. It is used as a default value
for lmpCcHelloDeadIntervalMin. Implementations should save
the… | scalar | LmpInterval | .1.3.6.1.2.1.10.227.1.8 |
| lmpCcHelloDeadIntervalDefaultMax This object specifies the default maximum value for the
HelloDeadInterval parameter. It is used as a default value
for lmpCcHelloDeadIntervalMax. Implementations should save the… | scalar | LmpInterval | .1.3.6.1.2.1.10.227.1.9 |