lldpXHmRemPTPClockValues – LLDP-EXT-HM-MIB

Object

column Bits

Shows, which clock type(s) are configured on a specific remote port
and/or device:
Bit (0) set to 1 indicates a slave clock
Bit (1) set to 1 indicates a master clock
Bit (2) set to 1 indicates a transparent clock
Bit (3) set to 1 indicates a boundary clock
Bit (4) set to 1 indicates a grandmaster clock
Bit (5) set to 1 indicates a clock in multi domain mode
Bit (6) set to 1 indicates a clock in simple mode
              
If no PTP is configured, all bits should be set to 0.

Context

MIB: LLDP-EXT-HM-MIB
OID: .1.0.8802.1.1.2.1.5.32867.1.3.4.1.7
Type: column
Access: readonly
Status: current
Parent: lldpXHmRemPTPEntry
Table: lldpXHmRemPTPTable
Siblings: 8

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	slave
`1`	master
`2`	transparent
`3`	boundary
`4`	grandmaster
`5`	multidomain
`6`	simplemode

Related Objects

Sibling Objects

Object	Type	Syntax	OID
lldpXHmRemPTPSupport Shows which PTP versions are supported by the remote system, based on installed hardware	column	LldpXHmRemPTPSupportSyntax	`.1.0.8802.1.1.2.1.5.32867.1.3.4.1.1`
lldpXHmRemPTPStatus Shows which PTP versions are enabled on the remote system	column	LldpXHmRemPTPStatusSyntax	`.1.0.8802.1.1.2.1.5.32867.1.3.4.1.2`
lldpXHmRemPTPSyncInterval Shows the PTPv1 and PTPv2 Synchronization Interval. If no PTP is available or configured, this value should be set to -128.	column	Integer32	`.1.0.8802.1.1.2.1.5.32867.1.3.4.1.3`
lldpXHmRemPTPv2AnnounceInterval Shows the PTPv2 Announce Interval. If PTPv2 is not configured or available, this should be set to -128.	column	Integer32	`.1.0.8802.1.1.2.1.5.32867.1.3.4.1.4`
lldpXHmRemPTPv2DataTransfer This field is only viable if PTPv2 is enabled. It shows the data transfer type configured on the remote port and device.	column	LldpXHmRemPTPv2DataTransferSyntax	`.1.0.8802.1.1.2.1.5.32867.1.3.4.1.5`
lldpXHmRemPTPv2DelayMechanism Shows the enabled PTPv2 delay mechanism	column	LldpXHmRemPTPv2DelayMechanismSyntax	`.1.0.8802.1.1.2.1.5.32867.1.3.4.1.6`
lldpXHmRemPTPv2SubdomainNumber Shows the PTPv2 subdomain number configured on the remote device. In case PTPv1 is configured, this value is of no relevance and will not be evaluated.	column	Integer32	`.1.0.8802.1.1.2.1.5.32867.1.3.4.1.8`
lldpXHmRemPTPv1SubdomainName This Octet String contains the PTPv1 subdomain name, an ASCII String with a maximum of 16 characters length, configured on the remote device. If PTPv2 is configured, this field sh…	column	OctetString	`.1.0.8802.1.1.2.1.5.32867.1.3.4.1.9`