lldpXdcbxLldpTxDisabled
LLDP-EXT-DCBX-MIB ·
.1.0.8802.1.1.2.1.5.6945.0.4
Object
notification
This trap is sent when the LLDP transmit has been disabled.
LLDP gives administrator control to enable/disable the protocol
independently on the Rx side and Tx side. Since DCBX is an
acknowledged protocol which uses LLDP, for the protocol to operate
correctly both LLDP Rx and Tx must be enabled on the interface on
which DCBX runs. The behavior of DCBX is as follows with respect to
LLDP Rx/Tx admin state controls:
- If either of Rx or Tx is in disable state, DCBX is disabled on the
interface. Neither the control nor feature state machines should
run. The LLDP PDU's that are generated from this interface do not
have any DCBX TLVs. If the peer sends DCBX TLVs they should be
ignored as far as the DCBX state machines are concerned.
- When DCBX is currently running and LLDP TX is disabled, then
according to the LLDP specification, a shutdown LLDPDU is sent. When
the peer receives this PDU, DCBX is determined to be disabled on the
peer. This is equivalent to DCBX TLV TTL expired in the Control
State machine and Rx.Feature.present() = FALSE in the Feature state
machine. If for some reason this frame is lost, then DCBX depends on
standard rxInfoTTL expiry of the peer's LLDP TLV's.
- When DCBX is currently running and LLDP Rx is disabled, then all
DCBX TLV's including the control TLV should be withdrawn from the
LLDP PDUs that the interface generates. The peer's behavior should
be the same as discussed in the previous case.
Context
- MIB
- LLDP-EXT-DCBX-MIB
- OID
.1.0.8802.1.1.2.1.5.6945.0.4- Type
- notification
- Status
- current
- Parent
- lldpXdcbxNotifications
- Siblings
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lldpXdcbxMiscControlError This trap is sent whenever an error occurs with DCBX control and there
is no other trap defined for the specific error condition. | notification | - | .1.0.8802.1.1.2.1.5.6945.0.1 |
| lldpXdcbxPeerConfigMismatch This trap is sent when the configuration received from peer results
into partial or complete mismatch. | notification | - | .1.0.8802.1.1.2.1.5.6945.0.10 |
| lldpXdcbxMiscFeatureError This trap is sent whenever lldpXdcbxFeatError is true and there is no
other trap defined for the specific error condition. | notification | - | .1.0.8802.1.1.2.1.5.6945.0.2 |
| lldpXdcbxMultiplePeers This trap is sent when multiple LLDP neighbors are detected on the
same port.
DCBX is expected to operate over a point to point link. If multiple
LLDP neighbors are det… | notification | - | .1.0.8802.1.1.2.1.5.6945.0.3 |
| lldpXdcbxLldpRxDisabled This trap is sent when the LLDP receive has been disabled.
LLDP gives administrator control to enable/disable the protocol
independently on the Rx side and Tx side. Sin… | notification | - | .1.0.8802.1.1.2.1.5.6945.0.5 |
| lldpXdcbxDupControlTlv This trap is sent when a duplicate control Sub-TLV is detected.
The DCBX Control Sub-TLV and the set of Feature Sub-TLVs can be
arranged in any order within the DCBX TL… | notification | - | .1.0.8802.1.1.2.1.5.6945.0.6 |
| lldpXdcbxDupFeatureTlv This trap is sent when a duplicate feature Sub-TLV is detected.
The DCBX Control Sub-TLV and the set of Feature Sub-TLVs can be
arranged in any order within the DCBX TL… | notification | - | .1.0.8802.1.1.2.1.5.6945.0.7 |
| lldpXdcbxPeerNoFeat This trap is sent when a feature is not supported on by a peer.
This condition can occur when a device does not support a feature (not
really an error) or if the featur… | notification | - | .1.0.8802.1.1.2.1.5.6945.0.8 |
| lldpXdcbxPeerNoResp This trap is sent when the peer has stopped responding as evidenced by
an LLDP timeout event. | notification | - | .1.0.8802.1.1.2.1.5.6945.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lldpXdcbxPortNumber Each port contained in the chassis (that is known to the LLDP agent)
is uniquely identified by a port number.
A port number has no mandatory relationship to an Inte… | column | LLDP-MIBLldpPortNumber | .1.0.8802.1.1.2.1.5.6945.1.1.1.1 |