sUniCktAdminDestMaxBurst
LIGHTSTREAM-MIB ·
.1.3.6.1.4.1.711.2.1.8.5.1.1.40
Object
column
mandatory
Integer32
This variable is the maximum Burst Size,
the maximum amount of insured plus uninsured
cells that the network will attempt to
deliver over the measurement interval from
the Destination to the Source.
This variable takes effect when sUniCktSts is set.
Context
- MIB
- LIGHTSTREAM-MIB
- OID
.1.3.6.1.4.1.711.2.1.8.5.1.1.40- Type
- column
- Access
- noaccess
- Status
- mandatory
- Parent
- sUniCktEntry
- Table
- sUniCktCfgTable
- Siblings
- 31
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sUniCktSrcNode mandatory The Node Identifier for the source
end of this virtual circuit. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.1 |
| sUniCktAdminDestNode mandatory The Node Identifier for the Destination
end of this virtual circuit.
This variable takes effect when sUniCktSts is set. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.10 |
| sUniCktOperDestNode mandatory The Node Identifier for the Destination
end of this virtual circuit. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.11 |
| sUniCktAdminDestIfIndex mandatory The ifIndex Value of the ifEntry this virtual
circuit is layered onto. See above comments to
calculate ifIndex.
This variable takes effect when sUniCktSts is se… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.12 |
| sUniCktOperDestIfIndex mandatory The ifIndex Value of the ifEntry this virtual
circuit is layered onto. See above comments to
calculate ifIndex. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.13 |
| sUniCktAdminDestVCI mandatory The Data Link Connection Identifier for this
virtual circuit.
This variable takes effect when sUniCktSts is set. | column | VCI | .1.3.6.1.4.1.711.2.1.8.5.1.1.14 |
| sUniCktOperDestVCI mandatory The Data Link Connection Identifier for this
virtual circuit. | column | VCI | .1.3.6.1.4.1.711.2.1.8.5.1.1.15 |
| sUniCktSrcIfIndex mandatory The ifIndex Value of the ifEntry this virtual
circuit is layered onto. See above comments to
calculate ifIndex. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.2 |
| sUniCktOperPrinBwType mandatory This variable indicates the type of service supported
on primary portion of this Virtual Circuit. | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.5.1.1.22 |
| sUniCktAdminPrinBwType mandatory This variable indicates the type of service supported
on primary portion of this Virtual Circuit.
This variable takes effect when sUniCktSts is set. | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.5.1.1.23 |
| sUniCktOperTransPri mandatory This variable indicates the transfer priority supported
on this Virtual Circuit. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.24 |
| sUniCktAdminTransPri mandatory This variable indicates the transfer priority supported
on this Virtual Circuit.
This variable takes effect when sUniCktSts is set. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.25 |
| sUniCktAdminSrcInsuredRate mandatory This variable, the Insured Rate is the
rate of insured data that the network commits
to supporting under normal network conditions
from source to destination.
This… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.26 |
| sUniCktOperSrcInsuredRate mandatory This variable, the Insured Rate is the
rate of insured data that the network commits
to supporting under normal network conditions
from source to destination.
This is specified in… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.27 |
| sUniCktAdminSrcInsuredBurst mandatory This variable indicates the Insured Burst
Size, which is the amount of insured
data, in cells, that the network agrees to
transfer under normal conditions, during the
mea… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.28 |
| sUniCktOperSrcInsuredBurst mandatory This variable indicates the Insured Burst
Size, which is the amount of insured
data, in cells, that the network agrees to
transfer under normal conditions, during the
mea… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.29 |
| sUniCktSrcVCI mandatory The Data Link Connection Identifier for this
virtual circuit. | column | VCI | .1.3.6.1.4.1.711.2.1.8.5.1.1.3 |
| sUniCktAdminSrcMaxRate mandatory This variable, the maximum rate is the
the total amount of insured plus uninsured
data throughput that the network attempts
to support under normal network conditions
from destin… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.30 |
| sUniCktOperSrcMaxRate mandatory This variable, the maximum rate is the
the total amount of insured plus uninsured
data throughput that the network attempts
to support under normal network conditions
from destin… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.31 |
| sUniCktAdminSrcMaxBurst mandatory This variable is the maximum Burst Size,
the maximum amount of insured plus uninsured
data, in cells, that the network will attempt to deliver
over the measurement interval from … | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.32 |
| sUniCktOperSrcMaxBurst mandatory This variable indicates the maximum Burst Size,
the maximum amount of insured plus uninsured
cells, that the network will attempt to deliver over
the measurement interval from the… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.33 |
| sUniCktAdminDestInsuredRate mandatory This variable, the Insured Rate is the
rate of insured data that the network commits
to supporting under normal network conditions
from destination to source.
This is specified i… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.34 |
| sUniCktOperDestInsuredRate mandatory This variable, the Insured Rate, is the
rate of insured data that the network commits
to supporting under normal network conditions
from destination to source.
This is specified i… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.35 |
| sUniCktAdminDestInsuredBurst mandatory This variable indicates the Insured Burst
Size, which is the amount of insured data,
in cells, that the network agrees to
transfer under normal conditions, during the
meas… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.36 |
| sUniCktOperDestInsuredBurst mandatory This variable indicates the Insured Burst
Size, which is the amount of insured data,
in cells, that the network agrees to
transfer under normal conditions, during the
meas… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.37 |
| sUniCktAdminDestMaxRate mandatory This variable, the maximum rate is the
the total amount of insured plus uninsured
data throughput that the network attempts
to support under normal network conditions
from destin… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.38 |
| sUniCktOperDestMaxRate mandatory This variable, the maximum rate is the
the total amount of insured plus uninsured
data throughput that the network attempts
to support under normal network conditions
from destin… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.39 |
| sUniCktOperDestMaxBurst mandatory This variable indicates the maximum Burst Size,
the maximum amount of insured plus uninsured
cells that the network will attempt
to deliver over the measurement interval
from the… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.41 |
| sUniCktAdminSecondaryScale mandatory Secondary bandwidth scaling factor. This is used to scale
down the actual amount of bandwidth to allocate for the
Secondary portion of a VC's bandwidth. This is specified
as a… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.42 |
| sUniCktOperSecondaryScale mandatory Operational version of the Secondary bandwidth scaling
factor. This is used to scale down the actual amount of
bandwidth to allocate for the Secondary portion of a VC's
bandwidt… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.5.1.1.43 |
| sUniCktSts mandatory This variable indicates the Status of this Virtual
Circuit. It may be enabled or disabled.
In order to modify a Virtual Circuit, the new
desired variables should… | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.5.1.1.99 |