pvcPrinBwType
LIGHTSTREAM-MIB ·
.1.3.6.1.4.1.711.2.1.8.6.1.1.9
Object
column
mandatory
r/w
Enumeration
This variable indicates the type of service supported
on primary portion of this Virtual Circuit.
This variable takes effect when pvcStatus is set.
This variable may not be modified unless pvcStatus
is set to disabled.
Context
- MIB
- LIGHTSTREAM-MIB
- OID
.1.3.6.1.4.1.711.2.1.8.6.1.1.9- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- pvcEntry
- Table
- pvcCfgTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | guaranteed |
2 | insured |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pvcSrcIfIndex mandatory The ifIndex Value of the ifEntry this virtual
circuit is layered onto. See above comments to
calculate ifIndex. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.1 |
| pvcTransPri mandatory This variable indicates the transfer priority supported
on this Virtual Circuit.
This variable takes effect when pvcStatus is set.
This variable may not be modified… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.10 |
| pvcUserDataPerCell mandatory User data bits per cell, specifies the expected
packing efficiency when frames are converted to cells.
It does not affect the actual packing of data into cells
but serves as an e… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.11 |
| pvcSrcPvcId mandatory The local PVC Connection Identifier for this
virtual circuit. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.2 |
| pvcSrcNode mandatory The Node Identifier for the source
end of this virtual circuit. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.3 |
| pvcSrcInsuredRate mandatory This variable, the Insured Rate is the
rate of insured data that the network commits
to supporting under normal network conditions
from Source to Destination.
It is specified in b… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.4 |
| pvcSrcInsuredBurst mandatory This variable indicates the Insured Burst
Size, which is the amount of insured data,
in bytes, that the network agrees to
transfer under normal conditions, during the
mea… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.5 |
| pvcSrcMaxRate mandatory This variable, the Maximum Rate is the
the maximum amount of insured plus uninsured
data throughput that the network agrees
to support from source to destination.
It is specified… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.6 |
| pvcSrcMaxBurst mandatory This variable indicates the Total Burst Size,
which is the maximum amount of insured plus
uninsured data bytes that the network will at-
tempt to deliver over the measurement inte… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.7 |
| pvcSecondaryScale mandatory Secondary bandwidth scaling factor. This is used to scale
down the actual amount of bandwidth to allocate for the
Secondary portion of a VC's bandwidth. This is specified
as a… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.6.1.1.8 |
| pvcStatus mandatory This variable indicates the Status of this Virtual
Circuit. It may be enabled or disabled.
In order to modify a Virtual Circuit, the new
desired variables should… | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.6.1.1.99 |