ms1InfoDataCellAvailable

LIGHTSTREAM-MIB · .1.3.6.1.4.1.711.2.1.4.2.1.19
MIB view Table view

Object

column mandatory Integer32 
The portion of this port's capacity in cells that
is available for data traffic.  This variable 
is adjusted for the bandwidth consumed by VCs 
created using this port.  It does not count VCs
which have been configured but not yet established.

Context

MIB
LIGHTSTREAM-MIB
OID
.1.3.6.1.4.1.711.2.1.4.2.1.19
Type
column
Access
readonly
Status
mandatory
Parent
ms1InfoEntry
Table
ms1InfoTable
Siblings
17

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ms1InfoIfIndex mandatory
This is the ifIndex value of the corresponding ifEntry. See comments above.
columnInteger32.1.3.6.1.4.1.711.2.1.4.2.1.1
ms1InfoOperControlBandwidthSize mandatory
The current operation value of the control bandwidth size for this port. This is a scaling factor. This value is multiplied by ms1InfoOperRcvBaudRate and the result divided by…
columnInteger32.1.3.6.1.4.1.711.2.1.4.2.1.10
ms1InfoAdminControlBandwidthSize mandatory
The current administratively desired value of the control bandwidth size for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the ope…
columnInteger32.1.3.6.1.4.1.711.2.1.4.2.1.11
ms1InfoOperDataBandwidthSize mandatory
The current operation value of the data bandwidth size for this port. This is a scaling factor. This value is multiplied by ms1InfoOperRcvBaudRate and the result divided by 10…
columnInteger32.1.3.6.1.4.1.711.2.1.4.2.1.12
ms1InfoAdminDataBandwidthSize mandatory
The current administratively desired value of the data bandwidth size for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operat…
columnInteger32.1.3.6.1.4.1.711.2.1.4.2.1.13
ms1InfoLcAutoEnable mandatory
State of the LC auto-enable flag for this port. If enabled the port will be enable at LC boot time. If disabled the port will remain disabled until configured and started by th…
columnEnumeration.1.3.6.1.4.1.711.2.1.4.2.1.14
ms1InfoLcDebugLevel mandatory
Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl.
columnInteger32.1.3.6.1.4.1.711.2.1.4.2.1.15
ms1InfoOperScramble mandatory
Operational value for Cell Payload scrambling used for this port.
columnEnumeration.1.3.6.1.4.1.711.2.1.4.2.1.16
ms1InfoAdminScramble mandatory
Administrative value for Cell Payload scrambling used for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operation value.
columnEnumeration.1.3.6.1.4.1.711.2.1.4.2.1.17
ms1InfoDataCellCapacity mandatory
The portion of this port's capacity in cells that is allocated for data traffic.
columnInteger32.1.3.6.1.4.1.711.2.1.4.2.1.18
ms1InfoOperCableLength mandatory
Operational value for Cable Length used for this port.
columnEnumeration.1.3.6.1.4.1.711.2.1.4.2.1.2
ms1InfoLinkUtilization mandatory
This is an estimated utilization on the link.
columnInteger32.1.3.6.1.4.1.711.2.1.4.2.1.20
ms1InfoOperFraming mandatory
Operational ATM framing typein use on this port.
columnEnumeration.1.3.6.1.4.1.711.2.1.4.2.1.21
ms1InfoAdminCableLength mandatory
Administrative value for Cable Length used for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operation value.
columnEnumeration.1.3.6.1.4.1.711.2.1.4.2.1.3
ms1InfoOperProtocol mandatory
Operational higher level protocol stack to support on this port.
columnEnumeration.1.3.6.1.4.1.711.2.1.4.2.1.4
ms1InfoAdminProtocol mandatory
Administratively desired higher level protocol stack to support on this port.
columnEnumeration.1.3.6.1.4.1.711.2.1.4.2.1.5
ms1InfoAdminOperTrigger mandatory
When proper commands written to this variable the LCC attempts to change the state of the port such that the oper status reflects the desired admin status.
columnEnumeration.1.3.6.1.4.1.711.2.1.4.2.1.99