ms1InfoAdminScramble

LIGHTSTREAM-MIB · .1.3.6.1.4.1.711.2.1.4.2.1.17

MIB view Table view

Object

column mandatory r/w Enumeration

Administrative value for Cell Payload scrambling used for
this port.  Setting the trigger variable 
ms1InfoAdimOperTrigger will cause this value
to become the operation value.

Context

MIB: LIGHTSTREAM-MIB
OID: .1.3.6.1.4.1.711.2.1.4.2.1.17
Type: column
Access: readwrite
Status: mandatory
Parent: ms1InfoEntry
Table: ms1InfoTable
Siblings: 17

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	t3ScrambleEnable
`2`	t3ScrambleDisable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ms1InfoIfIndex mandatory This is the ifIndex value of the corresponding ifEntry. See comments above.	column	Integer32	`.1.3.6.1.4.1.711.2.1.4.2.1.1`
ms1InfoOperControlBandwidthSize mandatory The current operation value of the control bandwidth size for this port. This is a scaling factor. This value is multiplied by ms1InfoOperRcvBaudRate and the result divided by…	column	Integer32	`.1.3.6.1.4.1.711.2.1.4.2.1.10`
ms1InfoAdminControlBandwidthSize mandatory The current administratively desired value of the control bandwidth size for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the ope…	column	Integer32	`.1.3.6.1.4.1.711.2.1.4.2.1.11`
ms1InfoOperDataBandwidthSize mandatory The current operation value of the data bandwidth size for this port. This is a scaling factor. This value is multiplied by ms1InfoOperRcvBaudRate and the result divided by 10…	column	Integer32	`.1.3.6.1.4.1.711.2.1.4.2.1.12`
ms1InfoAdminDataBandwidthSize mandatory The current administratively desired value of the data bandwidth size for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operat…	column	Integer32	`.1.3.6.1.4.1.711.2.1.4.2.1.13`
ms1InfoLcAutoEnable mandatory State of the LC auto-enable flag for this port. If enabled the port will be enable at LC boot time. If disabled the port will remain disabled until configured and started by th…	column	Enumeration	`.1.3.6.1.4.1.711.2.1.4.2.1.14`
ms1InfoLcDebugLevel mandatory Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl.	column	Integer32	`.1.3.6.1.4.1.711.2.1.4.2.1.15`
ms1InfoOperScramble mandatory Operational value for Cell Payload scrambling used for this port.	column	Enumeration	`.1.3.6.1.4.1.711.2.1.4.2.1.16`
ms1InfoDataCellCapacity mandatory The portion of this port's capacity in cells that is allocated for data traffic.	column	Integer32	`.1.3.6.1.4.1.711.2.1.4.2.1.18`
ms1InfoDataCellAvailable mandatory The portion of this port's capacity in cells that is available for data traffic. This variable is adjusted for the bandwidth consumed by VCs created using this port. It does n…	column	Integer32	`.1.3.6.1.4.1.711.2.1.4.2.1.19`
ms1InfoOperCableLength mandatory Operational value for Cable Length used for this port.	column	Enumeration	`.1.3.6.1.4.1.711.2.1.4.2.1.2`
ms1InfoLinkUtilization mandatory This is an estimated utilization on the link.	column	Integer32	`.1.3.6.1.4.1.711.2.1.4.2.1.20`
ms1InfoOperFraming mandatory Operational ATM framing typein use on this port.	column	Enumeration	`.1.3.6.1.4.1.711.2.1.4.2.1.21`
ms1InfoAdminCableLength mandatory Administrative value for Cable Length used for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operation value.	column	Enumeration	`.1.3.6.1.4.1.711.2.1.4.2.1.3`
ms1InfoOperProtocol mandatory Operational higher level protocol stack to support on this port.	column	Enumeration	`.1.3.6.1.4.1.711.2.1.4.2.1.4`
ms1InfoAdminProtocol mandatory Administratively desired higher level protocol stack to support on this port.	column	Enumeration	`.1.3.6.1.4.1.711.2.1.4.2.1.5`
ms1InfoAdminOperTrigger mandatory When proper commands written to this variable the LCC attempts to change the state of the port such that the oper status reflects the desired admin status.	column	Enumeration	`.1.3.6.1.4.1.711.2.1.4.2.1.99`