ms1InfoAdminCableLength
LIGHTSTREAM-MIB ·
.1.3.6.1.4.1.711.2.1.4.2.1.3
Object
column
mandatory
r/w
Enumeration
Administrative value for Cable Length used for this port. Setting the trigger variable ms1InfoAdimOperTrigger will cause this value to become the operation value.
Context
- MIB
- LIGHTSTREAM-MIB
- OID
.1.3.6.1.4.1.711.2.1.4.2.1.3- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ms1InfoEntry
- Table
- ms1InfoTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | t3CableLength1 |
2 | t3CableLength2 |
3 | e3CableLength1 |
4 | e3CableLength2 |
5 | e3CableLength3 |
6 | e3CableLength4 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ms1InfoIfIndex mandatory This is the ifIndex value of the corresponding
ifEntry. See comments above. | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.2.1.1 |
| ms1InfoOperControlBandwidthSize mandatory The current operation value of the control bandwidth
size for this port. This is a scaling factor. This
value is multiplied by ms1InfoOperRcvBaudRate and the
result divided by… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.2.1.10 |
| ms1InfoAdminControlBandwidthSize mandatory The current administratively desired value of the
control bandwidth size for this port. Setting the
trigger variable ms1InfoAdimOperTrigger will cause
this value to become the ope… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.2.1.11 |
| ms1InfoOperDataBandwidthSize mandatory The current operation value of the data bandwidth
size for this port. This is a scaling factor. This
value is multiplied by ms1InfoOperRcvBaudRate and the
result divided by 10… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.2.1.12 |
| ms1InfoAdminDataBandwidthSize mandatory The current administratively desired value of the
data bandwidth size for this port. Setting the
trigger variable ms1InfoAdimOperTrigger will cause
this value to become the operat… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.2.1.13 |
| ms1InfoLcAutoEnable mandatory State of the LC auto-enable flag for this port. If
enabled the port will be enable at LC boot time.
If disabled the port will remain disabled until
configured and started by th… | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.2.1.14 |
| ms1InfoLcDebugLevel mandatory Value of the LC debug level variable for this port.
This parameter is set in the LC EEPROM by portctl. | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.2.1.15 |
| ms1InfoOperScramble mandatory Operational value for Cell Payload scrambling used
for this port. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.2.1.16 |
| ms1InfoAdminScramble mandatory Administrative value for Cell Payload scrambling used for
this port. Setting the trigger variable
ms1InfoAdimOperTrigger will cause this value
to become the operation value. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.2.1.17 |
| ms1InfoDataCellCapacity mandatory The portion of this port's capacity in cells that
is allocated for data traffic. | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.2.1.18 |
| ms1InfoDataCellAvailable mandatory The portion of this port's capacity in cells that
is available for data traffic. This variable
is adjusted for the bandwidth consumed by VCs
created using this port. It does n… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.2.1.19 |
| ms1InfoOperCableLength mandatory Operational value for Cable Length used for this port. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.2.1.2 |
| ms1InfoLinkUtilization mandatory This is an estimated utilization on the link. | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.2.1.20 |
| ms1InfoOperFraming mandatory Operational ATM framing typein use on this port. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.2.1.21 |
| ms1InfoOperProtocol mandatory Operational higher level protocol stack to support
on this port. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.2.1.4 |
| ms1InfoAdminProtocol mandatory Administratively desired higher level protocol stack
to support on this port. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.2.1.5 |
| ms1InfoAdminOperTrigger mandatory When proper commands written to this variable the
LCC attempts to change the state of the port such
that the oper status reflects the desired admin status. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.2.1.99 |