frProvMiUserErrorThreshold
LIGHTSTREAM-MIB ·
.1.3.6.1.4.1.711.2.1.8.2.1.1.11
Object
column
mandatory
r/w
Integer32
This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down by the user side of the NNI interface. This is also refered to as N392 and nT2.
Context
- MIB
- LIGHTSTREAM-MIB
- OID
.1.3.6.1.4.1.711.2.1.8.2.1.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- frProvMiEntry
- Table
- frProvMiTable
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frProvMiIfIndex mandatory This is the ifIndex value of the corresponding
ifEntry. See comments above. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.2.1.1.1 |
| frProvMiUserFullEnquiryInterval mandatory Number of status enquiry intervals that pass
before issuance of a full status enquiry mes-
sage by the user portion of a NNI interface.
This is also refered to as N391 and nN… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.2.1.1.10 |
| frProvMiUserMonitoredEvents mandatory This is the number of status polling intervals
over which the error threshold is counted on a
NNI interface. For example, if within
'MonitoredEvents' number of events the stat… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.2.1.1.12 |
| frProvMiNetInterfaceType mandatory This variable states which type of Network
Interface should be used. UNI provides for
a User Network Interface, while NNI provides
for a Network to Network Interface. | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.2.1.1.13 |
| frProvMiState mandatory This variable states which Data Link Connec-
tion Management scheme is active (and by impli-
cation, what DLCI it uses) on the Frame Relay
interface. | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.2.1.1.2 |
| frProvMiAddressLen mandatory This variable states which address length in
octets. In the case of Q922 format, the length
indicates the entire length of the address in-
cluding the control portion. | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.2.1.1.3 |
| frProvMiNetRequestInterval mandatory This is the maximum number of seconds between
successive status enquiry messages. If a status
enquiry message does not arrive within this time
an error event occurs. This is a… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.2.1.1.4 |
| frProvMiNetErrorThreshold mandatory This is the maximum number of unanswered
Status Enquiries the equipment shall accept be-
fore declaring the interface down by the network
side of the interface. This is al… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.2.1.1.5 |
| frProvMiNetMonitoredEvents mandatory This is the number of status polling intervals
over which the error threshold is counted. For
example, if within 'MonitoredEvents' number of
events the station receives 'Erro… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.2.1.1.6 |
| frProvMiMaxSupportedVCs mandatory The maximum number of Virtual Circuits allowed
for this interface. Usually dictated by the
Frame Relay network. This variable will limit
the creation of more than this numbe… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.2.1.1.7 |
| frProvMiMulticast mandatory This indicates whether the Frame Relay inter-
face is using a multicast service. | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.2.1.1.8 |
| frProvMiUserPollingInterval mandatory This is the number of seconds between succes-
sive status enquiry messages sent by the user
portion of a NNI interface. This is also
refered to as T391 and nT1. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.2.1.1.9 |