frCktOperSecondaryScale
LIGHTSTREAM-MIB ·
.1.3.6.1.4.1.711.2.1.8.3.1.1.41
Object
column
mandatory
Integer32
Operational version of the Secondary bandwidth scaling
factor. This is used to scale down the actual amount of
bandwidth to allocate for the Secondary portion of a VC's
bandwidth. This is specified as a codepoint as follows:
Codepoints Meaning Comment
- ---------- ------- -------
0 - 100 x / 100 e.g., 1 => .01
101 - 109 x - 100 / 1000 e.g., 101 => .001
254 (reserved)
255 (per-port dflt)
Context
- MIB
- LIGHTSTREAM-MIB
- OID
.1.3.6.1.4.1.711.2.1.8.3.1.1.41- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- frCktEntry
- Table
- frCktCfgTable
- Siblings
- 33
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frCktSrcNode mandatory The Node Identifier for the source
end of this virtual circuit. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.1 |
| frCktAdminDestNode mandatory The Node Identifier for the Destination
end of this virtual circuit.
This variable takes effect when frCktStatus is set. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.10 |
| frCktOperDestNode mandatory The Node Identifier for the Destination
end of this virtual circuit. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.11 |
| frCktAdminDestIfIndex mandatory The ifIndex Value of the ifEntry this virtual
circuit is layered onto. See comments above to
calculate ifIndex.
This variable takes effect when frCktStatus is s… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.12 |
| frCktOperDestIfIndex mandatory The ifIndex Value of the ifEntry this virtual
circuit is layered onto. See comments above to
calculate ifIndex. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.13 |
| frCktAdminDestDlci mandatory The Data Link Connection Identifier for this
virtual circuit.
This variable takes effect when frCktStatus is set. | column | LightStreamDLCI | .1.3.6.1.4.1.711.2.1.8.3.1.1.14 |
| frCktOperDestDlci mandatory The Data Link Connection Identifier for this
virtual circuit. | column | LightStreamDLCI | .1.3.6.1.4.1.711.2.1.8.3.1.1.15 |
| frCktSrcIfIndex mandatory The ifIndex Value of the ifEntry this virtual
circuit is layered onto. See comments above to
calculate ifIndex value. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.2 |
| frCktAdminSrcInsuredRate mandatory This variable, the Insured Rate is the
rate of insured data that the network commits
to supporting under normal network conditions
from Source to Destination.
It is specified in b… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.25 |
| frCktOperSrcInsuredRate mandatory This variable, the Insured Rate is the
rate of insured data that the network commits
to supporting under normal network conditions
from source to destination.
It is specified in … | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.26 |
| frCktAdminSrcInsuredBurst mandatory This variable indicates the Insured Burst
Size, which is the amount of insured data,
in bytes, that the network agrees to
transfer under normal conditions, during the
mea… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.27 |
| frCktOperSrcInsuredBurst mandatory This variable indicates the Insured Burst
Size, which is the amount of insured data,
in bytes, that the network agrees to
transfer under normal conditions, during the
meas… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.28 |
| frCktAdminSrcMaxRate mandatory This variable, the Maximum Rate is the
the maximum amount of insured plus uninsured
data throughput that the network agrees
to support from source to destination.
It is specified… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.29 |
| frCktSrcDlci mandatory The Data Link Connection Identifier for this
virtual circuit. | column | LightStreamDLCI | .1.3.6.1.4.1.711.2.1.8.3.1.1.3 |
| frCktOperSrcMaxRate mandatory This variable, the Maximum Rate is the
the maximum amount of insured plus uninsured
data throughput that the network agrees
to support from source to destination.
It is specified… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.30 |
| frCktAdminSrcMaxBurst mandatory This variable indicates the Total Burst Size,
which is the maximum amount of insured plus
uninsured data bytes that the network will at-
tempt to deliver over the measurement inte… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.31 |
| frCktOperSrcMaxBurst mandatory This variable indicates the Total Burst Size,
which is the maximum amount of insured plus
uninsured data bytes that the network will at-
tempt to deliver over the measurement inte… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.32 |
| frCktAdminDestInsuredRate mandatory This variable, the Insured Rate is the
rate of insured data that the network commits
to supporting under normal network conditions
from destination to source.
It is specified in … | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.33 |
| frCktOperDestInsuredRate mandatory This variable, the Insured Rate is the
rate of insured data that the network commits
to supporting under normal network conditions
from destination to source.
It is specified in … | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.34 |
| frCktAdminDestInsuredBurst mandatory This variable indicates the Insured Burst
Size, which is the amount of insured
data, in bytes, that the network agrees to
transfer under normal conditions, during the
… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.35 |
| frCktOperDestInsuredBurst mandatory This variable indicates the Insured Burst
Size, which is the amount of insured
data, in bytes, that the network agrees to
transfer under normal conditions, during the
m… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.36 |
| frCktAdminDestMaxRate mandatory This variable, the Maximum Rate is the
the maximum amount of insured plus uninsured
data throughput that the network agrees
to transfer from destination to source.
It is specifie… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.37 |
| frCktOperDestMaxRate mandatory This variable, the maximum rate is the total
data throughput that the network will allow
to pass on this VC under optimal network conditions
from destination to source.
It is spec… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.38 |
| frCktAdminDestMaxBurst mandatory This variable indicates the Total Burst Size,
which is the maximum amount of insured plus
uninsured data bytes that the network will at-
tempt to deliver over the measurement inte… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.39 |
| frCktOperDestMaxBurst mandatory This variable indicates the Total Burst Size,
which is the maximum amount of insured plus
uninsured data bytes that the network will at-
tempt to deliver over the measurement inte… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.40 |
| frCktAdminSecondaryScale mandatory Secondary bandwidth scaling factor. This is used to scale
down the actual amount of bandwidth to allocate for the
Secondary portion of a VC's bandwidth. This is specified
as a… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.42 |
| frCktOperPrinBwType mandatory This variable indicates the type of service supported
on primary portion of this Virtual Circuit. | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.3.1.1.43 |
| frCktAdminPrinBwType mandatory This variable indicates the type of service supported
on primary portion of this Virtual Circuit.
This variable takes effect when frCktStatus is set. | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.3.1.1.44 |
| frCktOperTransPri mandatory This variable indicates the transfer priority supported
on this Virtual Circuit. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.45 |
| frCktAdminTransPri mandatory This variable indicates the transfer priority supported
on this Virtual Circuit.
This variable takes effect when frCktStatus is set. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.46 |
| frCktOperUserDataPerCell mandatory Operational User data bits per cell, specifies the expected
packing efficiency when frames are converted to cells.
It does not affect the actual packing of data into cells
but ser… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.47 |
| frCktAdminUserDataPerCell mandatory Administrative User data bits per cell, specifies the expected
packing efficiency when frames are converted to cells.
It does not affect the actual packing of data into cells
but… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.3.1.1.48 |
| frCktStatus mandatory This variable indicates the Status of this Virtual
Circuit. It may be enabled or disabled.
In order to modify a Virtual Circuit, the new
desired variables should… | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.3.1.1.99 |