edgeMeteringFactor
LIGHTSTREAM-MIB ·
.1.3.6.1.4.1.711.2.1.8.1.1.1.7
Object
column
mandatory
r/w
Integer32
Scale factor for the metering time charge, a value (divided by 256) by which to increase the time or slow down metering of traffic into the network. A value of 256 would typically keep the metering rate close to the minimum allowable rate for the aggregate information rate for the group of circuits being metered.
Context
- MIB
- LIGHTSTREAM-MIB
- OID
.1.3.6.1.4.1.711.2.1.8.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- edgePortEntry
- Table
- edgePortTable
- Siblings
- 10
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| edgeIfIndex mandatory This is the ifIndex value of the corresponding
ifEntry. See comments above. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.1.1.1.1 |
| edgeCallSetupBackoff mandatory This specifies the maximum power of 2 to backoff in call
setup retry attempts. For each retry up to this maxumim
the retry timer will be adjusted by multipliing by 2**(n).
The fi… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.1.1.1.10 |
| edgeMaxFrameSize mandatory This specifies the maximum frame size that can be transmitted
on this edge port. The size is specified in bytes. | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.1.1.1.11 |
| edgeUpcType mandatory Usage Parameter Control model type. This parameter
selects the UPC model, which regulates the flow
of data into the network. | column | Enumeration | .1.3.6.1.4.1.711.2.1.8.1.1.1.2 |
| edgeUserDataPerCell mandatory User data bits per cell. This specifies the expected
packing efficiency when frames are converted to cells.
It does not affect the actual packing of data into cells
but serves a… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.1.1.1.3 |
| edgeCellDelayVariance mandatory Cell Delay Variance in microseconds. This is the typical
variance in the delay added as a cell is processed by
an switch | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.1.1.1.4 |
| edgePrincipalScale mandatory Principal bandwidth scaling factor. This is used to scale
down the actual amount of bandwidth to allocate for the
principal portion of a VC's bandwidth. This is specified
as a… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.1.1.1.5 |
| edgeSecondaryScale mandatory Secondary bandwidth scaling factor. This is used to scale
down the actual amount of bandwidth to allocate for the
Secondary portion of a VC's bandwidth. This is specified
as a… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.1.1.1.6 |
| edgeMeteringBurstSize mandatory This is the minimum number of cells to burst at a time | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.1.1.1.8 |
| edgeCallSetupRetry mandatory This specifies the initial time to wait between successive
failed attempts to establish a connection. This interval
is in seconds. An incremental backoff algorithm may applied
t… | column | Integer32 | .1.3.6.1.4.1.711.2.1.8.1.1.1.9 |