clc1InfoLcDebugLevel
LIGHTSTREAM-MIB ·
.1.3.6.1.4.1.711.2.1.4.4.1.15
Object
column
mandatory
Integer32
Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl.
Context
- MIB
- LIGHTSTREAM-MIB
- OID
.1.3.6.1.4.1.711.2.1.4.4.1.15- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- clc1InfoEntry
- Table
- clc1InfoTable
- Siblings
- 18
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clc1InfoIfIndex mandatory This is the ifIndex value of the corresponding
ifEntry. See comments above. | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.4.1.1 |
| clc1InfoOperControlBandwidthSize mandatory The current operation value of the control bandwidth
size for this port. This is a scaling factor. This
value is multiplied by the port bit rate and the
result divided by 1000… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.4.1.10 |
| clc1InfoAdminControlBandwidthSize mandatory The current administratively desired value of the
control bandwidth size for this port. Setting the
trigger variable clc1InfoAdimOperTrigger will cause
this value to become the op… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.4.1.11 |
| clc1InfoOperDataBandwidthSize mandatory The current operation value of the data bandwidth
size for this port. This is a scaling factor. This
value is multiplied by the port bit rate and the
result divided by 1000 to… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.4.1.12 |
| clc1InfoAdminDataBandwidthSize mandatory The current administratively desired value of the
data bandwidth size for this port. Setting the
trigger variable clc1InfoAdimOperTrigger will cause
this value to become the opera… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.4.1.13 |
| clc1InfoLcAutoEnable mandatory State of the LC auto-enable flag for this port. If
enabled the port will be enable at LC boot time.
If disabled the port will remain disabled until
configured and started by th… | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.14 |
| clc1InfoOperScramble mandatory Operational value for Cell Payload scrambling used
for this port. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.16 |
| clc1InfoAdminScramble mandatory Administrative value for Cell Payload scrambling used for
this port. Setting the trigger variable
clc1InfoAdimOperTrigger will cause this value
to become the operation value. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.17 |
| clc1InfoDataCellCapacity mandatory The portion of this port's capacity in cells that
is allocated for data traffic. | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.4.1.18 |
| clc1InfoDataCellAvailable mandatory The portion of this port's capacity in cells that
is available for data traffic. This variable
is adjusted for the bandwidth consumed by VCs
created using this port. It does n… | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.4.1.19 |
| clc1InfoLinkUtilization mandatory This is an estimated utilization on the link. | column | Integer32 | .1.3.6.1.4.1.711.2.1.4.4.1.20 |
| clc1InfoOperClock mandatory Operational value for the source of transmit clock for this port. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.21 |
| clc1InfoAdminClock mandatory Administrative value for the source of transmit clock
used for this port. Setting the trigger variable
clc1InfoAdimOperTrigger will cause this value to
become the operation val… | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.22 |
| clc1InfoOperProtocol mandatory Operational higher level protocol stack to support
on this port. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.4 |
| clc1InfoAdminProtocol mandatory Administratively desired higher level protocol stack
to support on this port. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.5 |
| clc1InfoOperLoopMode mandatory Operational loop mode for this port:
none, internal, or external. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.6 |
| clc1InfoAdminLoopMode mandatory Administrative or desired loop mode for this
port: none, internal, or external. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.7 |
| clc1InfoAdminOperTrigger mandatory When proper commands written to this variable the
LCC attempts to change the state of the port such
that the oper status reflects the desired admin status. | column | Enumeration | .1.3.6.1.4.1.711.2.1.4.4.1.99 |