aclNewCfgTos
LENOVO-GbTOR-G8052-RS-MIB ·
.1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.47
Object
column
r/w
Enumeration
To enable/disable setting pkts based on TOS bits.
Context
- MIB
- LENOVO-GbTOR-G8052-RS-MIB
- OID
.1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.47- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aclNewCfgEntry
- Table
- aclNewCfgTable
- Siblings
- 58
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-512
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclNewCfgIndex The index associated with this ACL entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.1 |
| aclNewCfgSrcMACMask The address mask to be applied to aclNewCfgSrcMACAddress
for filtering. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.10 |
| aclNewCfgDstMACAddress The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:f… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.11 |
| aclNewCfgDstMACMask The address mask to be applied to aclNewCfgDstMACAddress
for filtering. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.12 |
| aclNewCfgEthernetTypeName The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
objec… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.13 |
| aclNewCfgEthernetTypeValue The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is othe… | column | Integer32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.14 |
| aclNewCfgVLanId The virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff).… | column | Integer32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.15 |
| aclNewCfgVLanMask The mask to be applied to aclNewCfgVLanId for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.16 |
| aclNewCfg8021pPriority The 802.1p priority to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.17 |
| aclNewCfgTypeOfService The type of service to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.18 |
| aclNewCfgProtocol The protocol to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.19 |
| aclNewCfgSrcIPAddress The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.20 |
| aclNewCfgSrcIPMask The address mask to be applied to aclNewCfgSrcIPAddress
for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.21 |
| aclNewCfgDstIPAddress The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.22 |
| aclNewCfgDstIPMask The address mask to be applied to aclNewCfgDstIPAddress for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.23 |
| aclNewCfgSrcPort The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff). | column | Integer32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.24 |
| aclNewCfgSrcPortMask The mask to be applied to aclNewCfgSrcPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.25 |
| aclNewCfgDstPort The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff). | column | Integer32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.26 |
| aclNewCfgDstPortMask The mask to be applied to aclNewCfgDstPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.27 |
| aclNewCfgTCPFlags The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||__… | column | Bits | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.28 |
| aclNewCfgEgressPortIndexes The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ....… | column | OctetString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.29 |
| aclNewCfgGroup The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.3 |
| aclNewCfgStatistics Whether statistics collection for this ACL is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.30 |
| aclNewCfgAddEgressPortIndex The port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read. | column | PortNumber | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.31 |
| aclNewCfgRemoveEgressPortIndex The port to be removed from the specified ACL. A value of zero
is always returned when this object is read. | column | PortNumber | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.32 |
| aclNewCfgDelete This is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.33 |
| aclNewCfgTCPFlagsMask The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG… | column | Bits | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.39 |
| aclNewCfgFilterAction The action to be performed on a packet that matches the filter
settings of this ACL entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.4 |
| aclNewCfgMeterAction Meter Action for this ACL. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.41 |
| aclNewCfgMeterEnable Meter state for this ACL. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.42 |
| aclNewCfgKbitsSec The commited rate of meter associated with this ACL entry. | column | Unsigned32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.43 |
| aclNewCfgKbitsBurst The maximum burst size of the meter associated with this ACL entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.44 |
| aclNewCfgUser Set user defined priority for this ACL. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.45 |
| aclNewCfgInprofDscp Set in profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.46 |
| aclNewCfgOutprofDscp Set out profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.48 |
| aclNewCfgUserEnable Set update method for this ACL. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.49 |
| aclNewCfgFilterActionSetPrio The COS queue to be used when the action for this ACL entry is
set to setprio. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.5 |
| aclNewCfgInprofDscpEnable Whether in profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL.
The value enab… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.50 |
| aclNewCfgOutprofDscpEnable Whether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value en… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.51 |
| aclNewCfgReset This is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.52 |
| aclNewCfgEthernetReset This is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.53 |
| aclNewCfgIpv4Reset This is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.54 |
| aclNewCfgTcpudpReset This is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.55 |
| aclNewCfgMeterReset This is an action object to reset an ACL Meter entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.56 |
| aclNewCfgRemarkReset This is an action object to reset an ACL Remark entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.57 |
| aclNewCfgRemarkInprofReset This is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.58 |
| aclNewCfgRemarkOutprofReset This is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.59 |
| aclNewCfgEthFmt The packet ethernet format to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.6 |
| aclNewCfgPktfmtReset This is an action object to reset an ACL Pktfmt entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.60 |
| aclNewCfgTagFmt The packet tagging format to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.7 |
| aclNewCfgMirrorPortIndex Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.74 |
| aclNewCfgIPFmt The packet IP format to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.8 |
| aclNewCfgLog Whether log for this ACL is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.81 |
| aclNewCfgSrcMACAddress The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.9 |
| aclNewCfgMirrorPortAlias The mirror port alias. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.91 |
| aclNewCfgEgressPortAliases The egress port alias. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.92 |
| aclNewCfgAddEgressPortAlias The port to be added using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.93 |
| aclNewCfgRemoveEgressPortAlias The port to be removed using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.7.9.1.1.2.1.94 |