vmapNewCfgKbitsSec
LENOVO-GbTOR-10G-L2L3-MIB ·
.1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.33
Object
column
r/w
Unsigned32
The commited rate of meter associated with this VMAP entry.
Context
- MIB
- LENOVO-GbTOR-10G-L2L3-MIB
- OID
.1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.33- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vmapNewCfgEntry
- Table
- vmapNewCfgTable
- Siblings
- 55
Syntax
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vmapNewCfgIndex The index associated with this VMAP entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.1 |
| vmapNewCfgDstMACMask The address mask to be applied to aclNewCfgDstMACAddress
for filtering. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.10 |
| vmapNewCfgEthernetTypeName The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
objec… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.11 |
| vmapNewCfgEthernetTypeValue The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is othe… | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.12 |
| vmapNewCfg8021pPriority The 802.1p priority to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.13 |
| vmapNewCfgTypeOfService The type of service to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.14 |
| vmapNewCfgProtocol The protocol to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.15 |
| vmapNewCfgSrcIPAddress The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.16 |
| vmapNewCfgSrcIPMask The address mask to be applied to aclNewCfgSrcIPAddress
for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.17 |
| vmapNewCfgDstIPAddress The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.18 |
| vmapNewCfgDstIPMask The address mask to be applied to aclNewCfgDstIPAddress for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.19 |
| vmapNewCfgFilterAction The action to be performed on a packet that matches the filter
settings of this VMAP entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.2 |
| vmapNewCfgSrcPort The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff). | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.20 |
| vmapNewCfgSrcPortMask The mask to be applied to aclNewCfgSrcPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.21 |
| vmapNewCfgDstPort The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff). | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.22 |
| vmapNewCfgDstPortMask The mask to be applied to aclNewCfgDstPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.23 |
| vmapNewCfgTCPFlags The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||__… | column | Bits | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.24 |
| vmapNewCfgTCPFlagsMask The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG… | column | Bits | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.25 |
| vmapNewCfgEgressPorts The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...… | column | OctetString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.26 |
| vmapNewCfgStatistics Whether statistics collection for this VMAP is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.27 |
| vmapNewCfgAddEgressPort The port to be added to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read. | column | PortNumber | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.28 |
| vmapNewCfgRemoveEgressPort The port to be removed from the specified VMAP. A value of zero
is always returned when this object is read. | column | PortNumber | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.29 |
| vmapNewCfgFilterActionSetPrio The COS queue to be used when the action for this VMAP entry is
set to setprio. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.3 |
| vmapNewCfgDelete This is an action object to delete an VMAP entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.30 |
| vmapNewCfgMeterAction Meter Action for this VMAP. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.31 |
| vmapNewCfgMeterEnable Meter state for this VMAP. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.32 |
| vmapNewCfgKbitsBurst The maximum burst size of the meter associated with this VMAP entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.34 |
| vmapNewCfgUser Set user defined priority for this VMAP. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.35 |
| vmapNewCfgInprofDscp Set in profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.36 |
| vmapNewCfgTos To enable/disable setting pkts based on TOS bits. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.37 |
| vmapNewCfgOutprofDscp Set out profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.38 |
| vmapNewCfgUserEnable Set update method for this VMAP. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.39 |
| vmapNewCfgEthFmt The packet ethernet format to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.4 |
| vmapNewCfgInprofDscpEnable Whether in profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this VMAP.
The value en… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.40 |
| vmapNewCfgOutprofDscpEnable Whether out profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this VMAP.
The value … | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.41 |
| vmapNewCfgReset This is an action object to reset an VMAP entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.42 |
| vmapNewCfgEthernetReset This is an action object to reset an VMAP Ethernet entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.43 |
| vmapNewCfgIpv4Reset This is an action object to reset an VMAP IPV4 entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.44 |
| vmapNewCfgTcpudpReset This is an action object to reset an VMAP Tcpudp entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.45 |
| vmapNewCfgMeterReset This is an action object to reset an VMAP Meter entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.46 |
| vmapNewCfgRemarkReset This is an action object to reset an VMAP Remark entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.47 |
| vmapNewCfgRemarkInprofReset This is an action object to reset an VMAP Remark Inprof entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.48 |
| vmapNewCfgRemarkOutprofReset This is an action object to reset an VMAP Remark Outprof entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.49 |
| vmapNewCfgTagFmt The packet tagging format to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.5 |
| vmapNewCfgPktfmtReset This is an action object to reset an VMAP Pktfmt entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.50 |
| vmapNewCfgMirrorPort Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.51 |
| vmapNewCfgFilterActionChangeVlan The VLAN will be modified when the action for this VMAP entry is
changevlan, , when this object is set to 0, the changevlan
action is disabled. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.52 |
| vmapNewCfgEgressPortAliases The port alias in the VMAP configured for egress filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.53 |
| vmapNewCfgMirrorPortAlias Set port in the VMAP for mirroring using it's alias. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.54 |
| vmapNewCfgAddEgressPortAlias The port to be added using it's alias to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.55 |
| vmapNewCfgRemoveEgressPortAlias The port to be removed using it's alias from the specified VMAP. A value of zero
is always returned when this object is read. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.56 |
| vmapNewCfgIPFmt The packet IP format to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.6 |
| vmapNewCfgSrcMACAddress The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.7 |
| vmapNewCfgSrcMACMask The address mask to be applied to aclNewCfgSrcMACAddress
for filtering. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.8 |
| vmapNewCfgDstMACAddress The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:f… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.2.1.9 |