vmapCurCfgKbitsSec
LENOVO-GbTOR-10G-L2L3-MIB ·
.1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.33
Object
column
Unsigned32
The commited rate of meter associated with this VMAP entry.
Context
- MIB
- LENOVO-GbTOR-10G-L2L3-MIB
- OID
.1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.33- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vmapCurCfgEntry
- Table
- vmapCurCfgTable
- Siblings
- 41
Syntax
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vmapCurCfgIndex The index associated with this VMAP entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.1 |
| vmapCurCfgDstMACMask The address mask applied to aclCurCfgDstMACAddress for filtering. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.10 |
| vmapCurCfgEthernetTypeName The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.11 |
| vmapCurCfgEthernetTypeValue The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is othe… | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.12 |
| vmapCurCfg8021pPriority The 802.1p priority to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.13 |
| vmapCurCfgTypeOfService The type of service to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.14 |
| vmapCurCfgProtocol The protocol to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.15 |
| vmapCurCfgSrcIPAddress The source IP address to be filtered. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.16 |
| vmapCurCfgSrcIPMask The address mask applied to aclCurCfgSrcIPAddress for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.17 |
| vmapCurCfgDstIPAddress The destination IP address to be filtered. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.18 |
| vmapCurCfgDstIPMask The address mask applied to aclCurCfgDstIPAddress for filtering. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.19 |
| vmapCurCfgFilterAction The action to be performed on a packet that matches the filter
settings of this VMAP entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.2 |
| vmapCurCfgSrcPort The source TCP/UDP port number to be filtered. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.20 |
| vmapCurCfgSrcPortMask The mask applied to aclCurCfgSrcPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.21 |
| vmapCurCfgDstPort The destination TCP/UDP port number to be filtered. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.22 |
| vmapCurCfgDstPortMask The mask applied to aclCurCfgDstPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.23 |
| vmapCurCfgTCPFlags The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
… | column | Bits | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.24 |
| vmapCurCfgTCPFlagsMask The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
… | column | Bits | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.25 |
| vmapCurCfgEgressPorts The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...… | column | OctetString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.26 |
| vmapCurCfgStatistics Whether statistics collection for this VMAP is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.27 |
| vmapCurCfgFilterActionSetPrio The value to be used when the action to be performed is setprio
for this VMAP entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.3 |
| vmapCurCfgMeterAction Meter Action for this VMAP. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.31 |
| vmapCurCfgMeterEnable Meter state for this VMAP. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.32 |
| vmapCurCfgKbitsBurst The maxmium burst sizeof meter associated with this VMAP entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.34 |
| vmapCurCfgUser Set user defined priority for this VMAP. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.35 |
| vmapCurCfgInprofDscp Set in profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.36 |
| vmapCurCfgTos To enable/disable setting pkts based on TOS bits. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.37 |
| vmapCurCfgOutprofDscp Set out profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.38 |
| vmapCurCfgUserEnable Set update method for this VMAP. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.39 |
| vmapCurCfgEthFmt The packet ethernet format to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.4 |
| vmapCurCfgInprofDscpEnable Whether in profile update DSCP for this VMAP is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.40 |
| vmapCurCfgOutprofDscpEnable Whether out profile update DSCP for this VMAP is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.41 |
| vmapCurCfgTagFmt The packet tag format to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.5 |
| vmapCurCfgMirrorPort Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.51 |
| vmapCurCfgFilterActionChangeVlan The classified VLAN only if the action is set as changevlan | column | Integer32 | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.52 |
| vmapCurCfgEgressPortAlias The port alias in the VMAP configured for egress filtering | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.53 |
| vmapCurCfgMirrorPortAlias Set port in the VMAP for mirroring using it's alias. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.54 |
| vmapCurCfgIPFmt The packet IP format to be filtered. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.6 |
| vmapCurCfgSrcMACAddress The source MAC address to be filtered. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.7 |
| vmapCurCfgSrcMACMask The address mask applied to aclCurCfgSrcMACAddress for filtering. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.8 |
| vmapCurCfgDstMACAddress The destination MAC address to be filtered. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.26543.2.7.4.9.3.1.1.1.9 |