radNewCfgLocal

LENOVO-GbTOR-10G-L2L3-MIB · .1.3.6.1.4.1.26543.2.7.4.1.1.3.16
MIB view Table view

Object

scalar r/w Enumeration 
Enable or disable RADIUS local for telnet/ssh/http/https.

Context

MIB
LENOVO-GbTOR-10G-L2L3-MIB
OID
.1.3.6.1.4.1.26543.2.7.4.1.1.3.16
Type
scalar
Access
readwrite
Status
current
Parent
agRadiusConfig
Siblings
25

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
radCurCfgPrimaryServer
The IP address of the Primary RADIUS server.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.26543.2.7.4.1.1.3.1
radNewCfgRetries
Number of retries to the RADIUS server.
scalarInteger32.1.3.6.1.4.1.26543.2.7.4.1.1.3.10
radCurCfgState
Enable or disable RADIUS authentication.
scalarEnumeration.1.3.6.1.4.1.26543.2.7.4.1.1.3.11
radNewCfgState
Enable or disable RADIUS authentication.
scalarEnumeration.1.3.6.1.4.1.26543.2.7.4.1.1.3.12
radCurCfgAuthenString
The RADIUS authentication string.
scalarOctetString.1.3.6.1.4.1.26543.2.7.4.1.1.3.13
radNewCfgAuthenString
The RADIUS authentication string.
scalarOctetString.1.3.6.1.4.1.26543.2.7.4.1.1.3.14
radCurCfgLocal
Enable or disable RADIUS local for telnet/ssh/http/https.
scalarEnumeration.1.3.6.1.4.1.26543.2.7.4.1.1.3.15
radCurCfgAuthenSecondString
The second RADIUS authentication string.
scalarOctetString.1.3.6.1.4.1.26543.2.7.4.1.1.3.17
radNewCfgAuthenSecondString
The second RADIUS authentication string.
scalarOctetString.1.3.6.1.4.1.26543.2.7.4.1.1.3.18
radCurCfgSecBd
Enable or disable RADIUS secure local for telnet.
scalarEnumeration.1.3.6.1.4.1.26543.2.7.4.1.1.3.19
radNewCfgPrimaryServer
The IP address of the Primary RADIUS server.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.26543.2.7.4.1.1.3.2
radNewCfgSecBd
Enable or disable RADIUS secure local for telnet.
scalarEnumeration.1.3.6.1.4.1.26543.2.7.4.1.1.3.20
radCurCfgPorttoUse
Specify whether the Radius should be performed over the data port or the management port.
scalarEnumeration.1.3.6.1.4.1.26543.2.7.4.1.1.3.21
radNewCfgPorttoUse
Specify whether the Radius should be performed over the data port or the management port.
scalarEnumeration.1.3.6.1.4.1.26543.2.7.4.1.1.3.22
radCurCfgSecPorttoUse
Specify whether the Radius should be performed over the data port or the management port.
scalarEnumeration.1.3.6.1.4.1.26543.2.7.4.1.1.3.23
radNewCfgSecPorttoUse
Specify whether the Radius should be performed over the data port or the management port.
scalarEnumeration.1.3.6.1.4.1.26543.2.7.4.1.1.3.24
radCurCfgSrcLoopIf
The index of the loopback interface that should be used for the source IP of the Radius message; 0 means that no loopback interface is used as the source of the Radius message.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.26543.2.7.4.1.1.3.25
radNewCfgSrcLoopIf
The index of the loopback interface that should be used for the source IP of the Radius message; 0 means that no loopback interface is used as the source of the Radius message.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.26543.2.7.4.1.1.3.26
radCurCfgSecondaryServer
The IP address of the Secondary RADIUS server.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.26543.2.7.4.1.1.3.3
radNewCfgSecondaryServer
The IP address of the Secondary RADIUS server.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.26543.2.7.4.1.1.3.4
radCurCfgPort
Specify the RADIUS port number for authentication.
scalarInteger32.1.3.6.1.4.1.26543.2.7.4.1.1.3.5
radNewCfgPort
Specify the RADIUS port number for authentication.
scalarInteger32.1.3.6.1.4.1.26543.2.7.4.1.1.3.6
radCurCfgTimeout
The maximum number of seconds before resending authentication to RADIUS server.
scalarInteger32.1.3.6.1.4.1.26543.2.7.4.1.1.3.7
radNewCfgTimeout
The maximum number of seconds before resending authentication to RADIUS server.
scalarInteger32.1.3.6.1.4.1.26543.2.7.4.1.1.3.8
radCurCfgRetries
Number of retries to the RADIUS server.
scalarInteger32.1.3.6.1.4.1.26543.2.7.4.1.1.3.9