agPortNewCfgTagPVID

LENOVO-GbTOR-10G-L2L3-MIB · .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.25

Object

column r/w Enumeration

This is PVID tag state of the port

Context

MIB: LENOVO-GbTOR-10G-L2L3-MIB
OID: .1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.25
Type: column
Access: readwrite
Status: current
Parent: agPortNewCfgTableEntry
Table: agPortNewCfgTable
Siblings: 31

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
agPortNewCfgIndx The index of the row in port configurations table.	column	PortNumber	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.1`
agPortNewCfgGigEthFctl This object is used to select port flow control for gigabit Ethernet connection.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.12`
agPortNewCfgPortName The switch port name.	column	OctetString	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.13`
agPortNewCfgLinkTrap Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not…	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.16`
agPortNewCfgState This is the state of the port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.2`
agPortNewCfgDscpRemarking Enable or disable Dscp remarking for the switch port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.23`
agPortNewCfgLearning Enable or disable L2 (FDB) Learning for the switch port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.26`
agPortNewCfgFloodBlocking Enable or disable flood blocking for the switch port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.27`
agPortNewCfgType The switch port type.	column	OctetString	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.29`
agPortNewCfgVlanTag This is VLAN tag state of the port	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.3`
agPortNewCfgLinkType The type of port connection. (for PVRST only)	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.30`
agPortNewCfgEdge The state of port edge.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.31`
agPortNewCfgErrDisableRecovery This object specifies whether the system should automatically re-enable this port when it becomes error-disabled. Use this object to change the port-level setting of the error-di…	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.35`
agPortNewCfgUdld Enable or disable UDLD for the switch port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.37`
agPortNewCfgUdldMode Enable or disable UDLD mode for the switch port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.38`
agPortNewCfgOam Enable or disable OAM Discovery process for the switch port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.39`
agPortNewCfgOamMode Enable or disable OAM mode for the switch port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.40`
agPortNewCfgBpduGuard Enable or disable BPDU guard for the switch port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.41`
agPortNewCfgMulticastThreshold New status of the port's Multicast Threshold.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.42`
agPortNewCfgMulticastThresholdRate New port's Multicast Threshold Rate.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.43`
agPortNewCfgBroadcastThreshold New status of the port's Broadcast Threshold.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.44`
agPortNewCfgBroadcastThresholdRate New port's Broadcast Threshold Rate.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.45`
agPortNewCfgDLFThreshold New status of the port's Destination Lookup Fail Threshold.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.46`
agPortNewCfgDLFThresholdRate New port's Destination Lookup Fail Threshold Rate.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.47`
agPortNewCfgMacAddrNotif Enables or Disables the MAC address notification syslog messages on the port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.48`
agPortNewCfgRmon This object is used to turn RMON on or off on the port.	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.5`
agPortNewCfgStpExtGuard Set spanning tree guard type	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.52`
agPortNewCfgLFDStatus This object indicates whether the system should put this port in an error-disabled state due to excessive link flaps. Use this object to change the port setting of the Link Flap D…	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.53`
agPortNewCfgPVID The default VLAN ID for the port.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.6`
agPortNewCfgPortAlias The port alias.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.68`
agPortNewCfgSpeed1G Limit the port to 1G speed	column	Enumeration	`.1.3.6.1.4.1.26543.2.7.4.1.1.2.3.1.69`

Indexes