lcsPTPClockConfEntryPortConfMPR

LCOS-SX-MIB · .1.3.6.1.4.1.2356.14.2.28.8.1.10
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
The interval for issuing Delay_Req messages for the port in E2e mode. This value is announced from the master to the slave in an announce message. The value is reflected in the MDR field in the Slave
The interval for issuing Pdelay_Req messages for the port in P2P mode
Note: The interpretation of this parameter has changed from release 2.40. In earlier versions the value was interpreted relative to the Sync interval, this was a violation of the standard, so now the value is interpreted as an interval. I.e. MPR = 0 => 1 Delay_Req pr sec, independent of the Sync rate.
Range is -7 to 5.

Context

MIB
LCOS-SX-MIB
OID
.1.3.6.1.4.1.2356.14.2.28.8.1.10
Type
column
Access
readwrite
Status
current
Parent
lcsPTPClockPortDataSetConfEntry
Table
lcsPTPClockPortDataSetConfTable
Siblings
13

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lcsPTPClockPortDataSetConfPort
Index
columnInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.1
lcsPTPClockConfEntryPortConfDelayAsymmetry
If the transmission delay for a link in not symmetric, the asymmetry can be configured here, see IEEE 1588 Section 7.4.2 Communication path asymmetry Range is -100000 to 100000.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.11
lcsPTPClockConfEntryPortConfIngressLatency
Ingress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. Range is -100000 to 100000.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.12
lcsPTPClockConfEntryPortConfEgressLatency
Egress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. Range is -100000 to 100000.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.13
lcsPTPClockConfEntryPortConfVersion
The current implementation only supports PTP version 2
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.14
lcsPTPClockConfEntryPortConfEnable
0:false 1:true
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.2
lcsPTPClockConfEntryPortConfStat
Dynamic member portState: Current state of the port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.28.8.1.3
lcsPTPClockConfEntryPortConfMDR
Dynamic member log Min Delay Req Interval: The delay request interval announced by the master.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.4
lcsPTPClockConfEntryPortConfPeerMeanPathDel
The path delay measured by the port in P2P mode. In E2E mode this value is 0
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.28.8.1.5
lcsPTPClockConfEntryPortConfAnv
The interval for issuing announce messages in master state. Range is -3 to 4.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.6
lcsPTPClockConfEntryPortConfATo
The timeout for receiving announce messages on the port. Range is 1 to 10.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.7
lcsPTPClockConfEntryPortConfSyv
The interval for issuing sync messages in master. Range is -7 to 4.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.8
lcsPTPClockConfEntryPortConfDlm
Configurable member delayMechanism: The delay mechanism used for the port: e2e End to end delay measurement p2p Peer to peer delay measurement. Can be defined per port in an Ordin…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.28.8.1.9