lcsPTPClockConfEntryClockParentDataSetRate
LCOS-SX-MIB ·
.1.3.6.1.4.1.2356.14.2.28.7.19
Object
scalar
SNMPv2-SMIInteger32
Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset compared to the master. (unit = ns per s).
Context
- MIB
- LCOS-SX-MIB
- OID
.1.3.6.1.4.1.2356.14.2.28.7.19- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- lcsPTPClockConfAndStatus
- Siblings
- 55
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lcsPTPClockConfEntryClockCurrentDataSetOffsetFromMaster Time difference between the master clock and the local slave clock, measured in ns. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.10 |
| lcsPTPClockConfEntryClockCurrentDataSetMeanPathDelay The mean propagation time for the link between the master and the local slave. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.11 |
| lcsPTPClockConfEntryClockCurrentDataSetSlavePort Shows which port is in slave mode. The value is 0 if no ports are in slave mode. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.12 |
| lcsPTPClockConfEntryClockCurrentDataSetSlaveState Shows synchronization state of the slave. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.13 |
| lcsPTPClockConfEntryClockCurrentDataSetHoldover After the slave has been in Locked mode during the stabilization period,
this value shows the actual clock offset between the freerun and the actual holdover frequency,
the valu… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.14 |
| lcsPTPClockConfEntryClockParentDataSetParentPortID Clock identity for the parent clock, if the local clock is not a slave, the value is the clocks own id. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.15 |
| lcsPTPClockConfEntryClockParentDataSetPort Port Id for the parent master port | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.16 |
| lcsPTPClockConfEntryClockParentDataSetPStat Parents Stats (always false). | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.17 |
| lcsPTPClockConfEntryClockParentDataSetVar It is observed parent offset scaled log variance | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.18 |
| lcsPTPClockConfEntryClockInstance | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.2 |
| lcsPTPClockConfEntryClockParentDataSetGrandMasterID Clock identity for the grand master clock, if the local clock is not a slave, the value is the clocks own id. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.20 |
| lcsPTPClockConfEntryClockParentDataSetGrandMasterClockQuality The clock quality announced by the grand master (See description of Clock Default DataSet:Clock Quality) | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.21 |
| lcsPTPClockConfEntryClockParentDataSetPri1 Clock priority 1 announced by the grand master | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.22 |
| lcsPTPClockConfEntryClockParentDataSetPri2 Clock priority 2 announced by the grand master. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.23 |
| lcsPTPClockConfEntryClockDefaultDataSetClockID An internal instance id (0..3) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.24 |
| lcsPTPClockConfEntryClockDefaultDataSetDeviceType Indicates the Type of the Clock Instance. There are five Device Types.
1. Ord-Bound - Clock's Device Type is Ordinary-Boundary Clock.
2. P2p Transp - Clock's Device Type is Peer t… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.25 |
| lcsPTPClockConfEntryClockDefaultDataSet2StepFlag True if two-step Sync events and Pdelay_Resp events are used
0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.26 |
| lcsPTPClockConfEntryClockDefaultDataSetPorts The total number of physical ports in the node | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.27 |
| lcsPTPClockConfEntryClockDefaultDataSetClockIdentity It shows unique clock identifier | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.28 |
| lcsPTPClockConfEntryClockDefaultDataSetDom Clock domain [0..127]. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.29 |
| lcsPTPClockConfEntryDeviceType | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.3 |
| lcsPTPClockConfEntryClockDefaultDataSetClockQuality The clock quality is determined by the system, and holds 3 parts: Clock Class, Clock Accuracy and OffsetScaledLog Variance as defined in IEEE1588.
The Clock Accuracy values are de… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.30 |
| lcsPTPClockConfEntryClockDefaultDataSetPri1 Clock priority 1 [0..255] used by the BMC master select algorithm. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.31 |
| lcsPTPClockConfEntryClockDefaultDataSetPri2 Clock priority 2 [0..255] used by the BMC master select algorithm. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.32 |
| lcsPTPClockConfEntryClockDefaultDataSetProtocol 0:Ethernet
1:Ethernet Mixed
2:IP4Multi
3:IP4Mixed
4:IP4Uni
5:OAM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.33 |
| lcsPTPClockConfEntryClockDefaultDataSetOneWay If true, one way measurements are used.
This parameter applies only to a slave.
In one-way mode no delay measurements are performed, i.e. this is applicable only if frequency sy… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.34 |
| lcsPTPClockConfEntryClockDefaultDataSetVLANTagEnable The VLAN Tag Enable parameter is ignored, because the tagging is controlled by the VLAN configuration.
0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.35 |
| lcsPTPClockConfEntryClockDefaultDataSetVID TVLAN Identifier used for tagging the VLAN packets.
range:1-4094 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.36 |
| lcsPTPClockConfEntryClockDefaultDataSetPCP Priority Code Point value used for PTP frames. range:0-7 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.37 |
| lcsPTPClockConfEntryClockDefaultDataSetDSCP | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.38 |
| lcsPTPClockConfEntryClockTimePropertiesDataSetUtcOffset range: 0-10000 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.39 |
| lcsPTPClockConfEntryProfile | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.4 |
| lcsPTPClockConfEntryClockTimePropertiesDataSetValid 0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.40 |
| lcsPTPClockConfEntryClockTimePropertiesDataSetLeap59 0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.41 |
| lcsPTPClockConfEntryClockTimePropertiesDataSetLeap61 0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.42 |
| lcsPTPClockConfEntryClockTimePropertiesDataSetTimeTrac 0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.43 |
| lcsPTPClockConfEntryClockTimePropertiesDataSetFreqTrac 0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.44 |
| lcsPTPClockConfEntryClockTimePropertiesDataSetPTPTimeScale 0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.45 |
| lcsPTPClockConfEntryClockTimePropertiesDataSetTimeSource range: 0-255 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.46 |
| lcsPTPClockConfEntryFilterParametersFilterType Shows the filter type used which can be either the basic filter or an advanced filter that can be configured to use only a fraction of the packets received
(i.e. the packets that… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.47 |
| lcsPTPClockConfEntryFilterParametersDelayFilter range:0-6 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.48 |
| lcsPTPClockConfEntryFilterParametersPeriod range:1-10000 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.49 |
| lcsPTPClockConfEntryApplyProfileDefaults -1:n/a
0:normal state
1:apply profile default | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.5 |
| lcsPTPClockConfEntryFilterParametersDist range:1-10 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.50 |
| lcsPTPClockConfEntryServoParametersDisplay If true then Offset From Master, MeanPathDelay and clockAdjustment are logged on the debug terminal
0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.51 |
| lcsPTPClockConfEntryServoParametersPEnable If true the P part of the algorithm is included
0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.52 |
| lcsPTPClockConfEntryServoParametersIEnable If true the I part of the algorithm is included
0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.53 |
| lcsPTPClockConfEntryServoParametersDEnable If true the D part of the algorithm is included
0:false
1:true | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.54 |
| lcsPTPClockConfEntryServoParametersPConstant range:0-1000 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.55 |
| lcsPTPClockConfEntryServoParametersIConstant range:0-10000 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.56 |
| lcsPTPClockConfEntryServoParametersDConstant range:0-1000 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.57 |
| lcsPTPClockConfEntryPTPTime Shows the actual PTP time with nanosecond resolution. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.6 |
| lcsPTPClockConfEntryClockAdjustmentMethod Shows the actual clock adjustment method. The method depends on the available hardware. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.28.7.7 |
| lcsPTPClockConfEntrySynchronizeToSystemClock Activate this button to synchronize the System Clock to PTP Time.
1:Synchronize to system clock. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.8 |
| lcsPTPClockConfEntryClockCurrentDataSetstpRm Steps Removed : It is the number of PTP clocks traversed from the grandmaster to the local slave clock. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.28.7.9 |