lcsNASConfMaxReauthCount
LCOS-SX-MIB ·
.1.3.6.1.4.1.2356.14.2.16.1.1.11
Object
scalar
r/w
Integer32
The number of times the switch transmits an EAPOL Request Identity frame without response before considering entering the Guest VLAN is adjusted with this setting. default: 2, range: 1-255.
Context
- MIB
- LCOS-SX-MIB
- OID
.1.3.6.1.4.1.2356.14.2.16.1.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- lcsNASConf
- Siblings
- 13
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lcsNASConfMode Indicates if NAS is globally enabled or disabled on
the switch. | scalar | AdminMode | .1.3.6.1.4.1.2356.14.2.16.1.1.1 |
| lcsNASConfGuestVLANID This is the value that a port's Port VLAN ID is set to if
a port is moved into the Guest VLAN.
default: 1,
range: 1-4094. | scalar | Integer32 | .1.3.6.1.4.1.2356.14.2.16.1.1.10 |
| lcsNASConfMacBasedUseEAP The switch can do the RADIUS authentication on behalf of the client in the
MAC-based Auth. port authentication mode. It can either present itself as a
normal 802.1X client to the … | scalar | AdminMode | .1.3.6.1.4.1.2356.14.2.16.1.1.101 |
| lcsNASConfAllowGuestVLAN The switch remembers if an EAPOL frame has been received
on the port for the life-time of the port. | scalar | AdminMode | .1.3.6.1.4.1.2356.14.2.16.1.1.12 |
| lcsNASPortConfTable The NAS Port Configuration Table.
INDEX for this table is ifIndex which is
equivalent to the panel port number. | table | - | .1.3.6.1.4.1.2356.14.2.16.1.1.13 |
| lcsNASConfReauthenticationEnabled If enable, successfully authenticated supplicants/clients
are reauthenticated after the interval specified by the
Reauthentication Period. | scalar | AdminMode | .1.3.6.1.4.1.2356.14.2.16.1.1.2 |
| lcsNASConfReauthenticationPeriod Determines the period, in seconds, after which a
connected client must be reauthenticated.
default: 3600 sec,
range: 1-3600 sec. | scalar | Integer32 | .1.3.6.1.4.1.2356.14.2.16.1.1.3 |
| lcsNASConfEAPOLTimeout Determines the time for retransmission of Request
Identity EAPOL frames.
default: 30 sec,
range: 1-65535 sec. | scalar | Integer32 | .1.3.6.1.4.1.2356.14.2.16.1.1.4 |
| lcsNASConfAgingPeriod When the NAS module uses the Port Security module to
secure MAC addresses, the Port Security module needs to
check for activity on the MAC address in question at regular
intervals… | scalar | Integer32 | .1.3.6.1.4.1.2356.14.2.16.1.1.5 |
| lcsNASConfHoldTime If a client is denied access - either because the RADIUS
server denies the client access or because the RADIUS server
request times out - the client is put on hold in the
Unauthor… | scalar | Integer32 | .1.3.6.1.4.1.2356.14.2.16.1.1.6 |
| lcsNASConfRADIUSQoSEnabled RADIUS-assigned QoS provides a means to centrally control
the traffic class to which traffic coming from a successfully
authenticated supplicant is assigned on the switch. | scalar | AdminMode | .1.3.6.1.4.1.2356.14.2.16.1.1.7 |
| lcsNASConfRADIUSVLANEnabled RADIUS-assigned VLAN provides a means to centrally control
the VLAN on which a successfully authenticated supplicant
is placed on the switch. | scalar | AdminMode | .1.3.6.1.4.1.2356.14.2.16.1.1.8 |
| lcsNASConfGuestVLANEnabled A Guest VLAN is a special VLAN - typically with limited
network access - on which 802.1X-unaware clients are placed
after a network administrator-defined timeout. | scalar | AdminMode | .1.3.6.1.4.1.2356.14.2.16.1.1.9 |