lcsFaultMgmtTestSignalRate
LCOS-SX-MIB ·
.1.3.6.1.4.1.2356.14.2.26.11.7
Object
The TST frame transmission bit rate - in Mega bits pr. second. Limit is 400 Mbps. This is the bit rate of a standard frame without any encapsulation. If 1 Mbps rate is selected in a EVC MEP, the added tag will give a higher bitrate on the wire.
Context
- MIB
- LCOS-SX-MIB
- OID
.1.3.6.1.4.1.2356.14.2.26.11.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- lcsFaultMgmtTestSignal
- Siblings
- 8
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lcsFaultMgmtTestSignalSequenceNumber 0:disable
1:enable | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.26.11.10 |
| lcsFaultMgmtTestSignalTx Test Signal based on transmitting TST PDU can be enabled/disabled.
0:disable
1:enable | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.26.11.2 |
| lcsFaultMgmtTestSignalRx Test Signal based on transmitting TST PDU can be enabled/disabled.
0:disable
1:enable | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.26.11.3 |
| lcsFaultMgmtTestSignalDEI The DEI to be inserted as PCP bits in TAG (if any).
0:disable
1:enable | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.26.11.4 |
| lcsFaultMgmtTestSignalPriority The priority to be inserted as PCP bits in TAG (if any).
Range:0-7 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.26.11.5 |
| lcsFaultMgmtTestSignalPeerMEP The TST frame destination MAC will be taken from the 'Unicast Peer MAC' configuration of this peer. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.26.11.6 |
| lcsFaultMgmtTestSignalSize The TST frame size. This is entered as the wanted size (in bytes) of a un-tagged frame containing TST OAM PDU - including CRC (four bytes). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.26.11.8 |
| lcsFaultMgmtTestSignalPattern The 'empty' TST PDU has the size of 12 bytes.
In order to achieve the configured frame size a data TLV will be added with a pattern.
0:All Zero
1:All One
2:10101010 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.26.11.9 |