agentLagSummaryLocalPreferenceMode
LANCOM-SWITCHING-MIB ·
.1.3.6.1.4.1.2356.16.1.1.2.2.2.1.14
Object
column
r/w
Enumeration
Agent LAG Local Preference Mode.
Enables or disables the LAG interface's Local Preference Mode.
Context
- MIB
- LANCOM-SWITCHING-MIB
- OID
.1.3.6.1.4.1.2356.16.1.1.2.2.2.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agentLagSummaryConfigEntry
- Table
- agentLagSummaryConfigTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentLagSummaryLagIndex Agent LAG IfIndex.
This value corresponds with the LAG interface in the ifTable. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.1 |
| agentLagSummaryType Agent LAG Type.
static(1) - This LAG is staticly maintained.
dynamic(2) - This LAG is dynamicly maintained. | column | Enumeration | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.10 |
| agentLagSummaryStaticCapability Agent LAG Static Capability
enable(1) - Static capability is enabled for this LAG interface
disable(2) - Static capability is disabled for this LAG interface | column | Enumeration | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.11 |
| agentLagSummaryHashOption LAG Hashing Option.
Valid values correspond to
1 (=Source MAC, VLAN, EtherType, and incoming port
associated with the packet)
2 (=Destination M… | column | Integer32 | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.12 |
| agentLagSummaryMinimumActiveLinks Agent LAG Threshold.
This configures the threshold(i.e minimum number of active ports)
value for trunk port . | column | Integer32 | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.13 |
| agentLagSummaryMtuValue Configures the MTU value for this LAG interface. The maximum value is
dependent on the platform. | column | Unsigned32 | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.15 |
| agentLagSummaryPortCounter LAG port flap counter. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.17 |
| agentLagSummaryRateLoadInterval The length of time for which data is used to compute load statistics.
The value is given in seconds, and must be a multiple of 30. The allowable
range is 30 to 600 seconds. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.18 |
| agentLagSummaryName Agent LAG Name.
The associated name of the LAG used during creation. Duplicate names are not allowed. | column | OctetString | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.2 |
| agentLagSummaryFlushTimer obsolete Agent LAG FlushTimer. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.3 |
| agentLagSummaryLinkTrap Agent LAG LinkTrap.
Configures sending Link Up/Down traps when the LAG interface goes Up or Down. | column | Enumeration | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.4 |
| agentLagSummaryAdminMode Agent LAG AdminMode.
Administratively enables or disables this LAG interface. | column | Enumeration | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.5 |
| agentLagSummaryStpMode Agent LAG StpMode
Administratively enables or disables STP on this interface. | column | Enumeration | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.6 |
| agentLagSummaryAddPort Agent LAG AddPort.
Set to a non 0 value to add a port to the LAG. Values correspond to
ifIndex values in the ifTable.
Note: agentPortType for the po… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.7 |
| agentLagSummaryDeletePort Agent LAG DeletePort.
Set to a non 0 value to remove a port from the LAG. Values correspond to
ifIndex values in the ifTable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.8 |
| agentLagSummaryStatus Agent LAG Status.
active(1) - This LAG is enabled.
destroy(6) - Set to this value to remove the LAG. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2356.16.1.1.2.2.2.1.9 |