agentRadiusServerAttr31MacFormat
LANCOM-RADIUS-AUTH-CLIENT-MIB ·
.1.3.6.1.4.1.2356.16.1.8.1.29
Object
scalar
r/w
Enumeration
To configure radius server Attribute 31 Mac-Format.
Context
- MIB
- LANCOM-RADIUS-AUTH-CLIENT-MIB
- OID
.1.3.6.1.4.1.2356.16.1.8.1.29- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- agentRadiusConfigGroup
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | radiusFormatLegacyLowerCase |
2 | radiusFormatLegacyUpperCase |
3 | radiusFormatIetfLowerrCase |
4 | radiusFormatIetfUpperCase |
5 | radiusFormatUnformatLowerCase |
6 | radiusFormatUnformatUpperCase |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentRadiusMaxTransmit Maximum number of retransmissions of a RADIUS request packet | scalar | Unsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.1 |
| agentRadiusAccountingServers Number of RADIUS Accounting Servers that have been configured. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.10 |
| agentRadiusNamedAuthenticationServerGroups Number of configured RADIUS named Authentication Server groups. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.11 |
| agentRadiusNamedAccountingServerGroups Number of configured RADIUS named Accounting Server groups. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.12 |
| agentRadiusDeadTime Length of time (in minutes) for which a RADIUS server is skipped over by transaction requests. | scalar | Unsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.13 |
| agentRadiusServerKey RADIUS Server key specifies the authentication and encryption key for all RADIUS communications
between the switch and the RADIUS server. This key must match the encryption used o… | scalar | OctetString | .1.3.6.1.4.1.2356.16.1.8.1.14 |
| agentRadiusSourceIPAddr Source IP address that will be used for the communication with RADIUS servers. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2356.16.1.8.1.15 |
| agentRadiusNasIpAddress Used to set the NAS-IP address for the radius server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2356.16.1.8.1.16 |
| agentAuthorizationNetworkRadiusMode Used to enable/disable Vlan assignment mode. | scalar | Enumeration | .1.3.6.1.4.1.2356.16.1.8.1.17 |
| agentRadiusSourceInterface A source-interface selection on an Interface Index (like vlan based
routing interface, port based routing interface, loopback interface).
A non-zero value indicates ifIndex for th… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2356.16.1.8.1.18 |
| agentDasRequestsReceived Number of dynamic authorization requests received. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.19 |
| agentRadiusTimeout Time out duration (in seconds) before packets are retransmitted | scalar | Unsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.2 |
| agentDasACKResponsesSent Number of dynamic authorization ACK responses sent. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.20 |
| agentDasNAKResponsesSent Number of dynamic authorization NAK responses sent. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.21 |
| agentDasRequestsIgnored Number of dynamic authorization requests ignored. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.22 |
| agentDasRequestsWithMissingOrUnsupportedAttribute Number of dynamic authorization requests received with
missing or unsupported attribute. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.23 |
| agentDasRequestsWithSessionContextNotFound Number of dynamic authorization requests received with
session context not found. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.24 |
| agentDasRequestsWithInvalidAttributeValue Number of dynamic authorization requests received with
invalid attribute value. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.25 |
| agentDasRequestsAdministrativelyProhibited Number of dynamic authorization requests administratively
prohibited. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.26 |
| agentRadiusServicePortSrcInterface To select Service Port as a source-interface. | scalar | Enumeration | .1.3.6.1.4.1.2356.16.1.8.1.27 |
| agentRadiusNasIpv6Address Used to set the NAS-IPv6 address for the radius server. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2356.16.1.8.1.28 |
| agentRadiusAccountingMode Identifies if RADIUS Accounting has been enabled or not | scalar | Enumeration | .1.3.6.1.4.1.2356.16.1.8.1.3 |
| agentRadiusServerAttr30MacFormat To configure radius server Attribute 30 Mac-Format. | scalar | Enumeration | .1.3.6.1.4.1.2356.16.1.8.1.30 |
| agentRadiusServerAttr32MacFormat To configure radius server Attribute 32 Mac-Format. | scalar | Enumeration | .1.3.6.1.4.1.2356.16.1.8.1.31 |
| agentRadiusServerInclude32InAccessRequest To include Attribute 32 in Access and Accounting requests or not.
Configuring this to 'doNotInclude' will set agentRadiusServerInclude32InAccessRequestFormat
to its default value. | scalar | Enumeration | .1.3.6.1.4.1.2356.16.1.8.1.32 |
| agentRadiusServerInclude32InAccessRequestFormat To configure radius server Attribute 32 format to be sent in Access and Accounting requests.
This can only be configured if agentRadiusServerInclude32InAccessRequest is set to 'in… | scalar | OctetString | .1.3.6.1.4.1.2356.16.1.8.1.33 |
| agentRadiusServerInclude44InAccessRequest To include Attribute 44 in Access and Accounting requests or not. | scalar | Enumeration | .1.3.6.1.4.1.2356.16.1.8.1.34 |
| agentRadiusNamedAuthenticationServerGroupConfigTable Table with information about RADIUS named Authentication
Server groups. | table | - | .1.3.6.1.4.1.2356.16.1.8.1.35 |
| agentRadiusNamedAccountingServerGroupConfigTable Table with information about RADIUS named Accounting
Server groups. | table | - | .1.3.6.1.4.1.2356.16.1.8.1.36 |
| agentRadiusServerDeadCriteriaTime Length of time (in seconds) during which a valid response
from the RADIUS server may not be expected. This is used
as a criteria to determine if the RADIUS server is
unavailable. | scalar | Unsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.37 |
| agentRadiusServerDeadCriteriaTries Indicates the number of consecutive requests that have timed out
after retransmitting them to RADIUS server. This is used as a
criteria to determine if the RADIUS server is unav… | scalar | Unsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.38 |
| agentRadiusStatsClear When set to enable(1), all Radius statistics will be reset. | scalar | Enumeration | .1.3.6.1.4.1.2356.16.1.8.1.4 |
| agentRadiusAccountingIndexNextValid Indicates the next valid index into the agentRadiusAccountingConfigTable
for creation. If no additional entries are allowed, this will be 0. | scalar | Integer32 | .1.3.6.1.4.1.2356.16.1.8.1.5 |
| agentRadiusAccountingConfigTable Table with information about Radius Accounting Server IP
Addresses, port numbers and shared secret. Only one entry is
supported at this time. | table | - | .1.3.6.1.4.1.2356.16.1.8.1.6 |
| agentRadiusServerIndexNextValid Indicates the next valid index into the agentRadiusServerConfigTable
for creation. If no additional entries are allowed, this will be 0. | scalar | Integer32 | .1.3.6.1.4.1.2356.16.1.8.1.7 |
| agentRadiusServerConfigTable Table with information about Radius Authentication Server IP
Addresses, port numbers and shared secret | table | - | .1.3.6.1.4.1.2356.16.1.8.1.8 |
| agentRadiusAuthenticationServers Number of RADIUS Authentication Servers that have been configured. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.8.1.9 |