gs2310pNASConfigMacBasedUseEAP

LANCOM-GS2310P-MIB · .1.3.6.1.4.1.2356.800.3.2311.3.11.1.101

MIB view Table view

Object

scalar r/w Enumeration

The switch can do the RADIUS authentication on behalf of the client in the
MAC-based Auth. port authentication mode. It can either present itself as a
normal 802.1X client to the RADIUS Server and use EAP, supporting only the
MD5-Challenge, or alternativly can use plain RADIUS with username / passwort
authentification without EAP if this setting is disabled.

Context

MIB: LANCOM-GS2310P-MIB
OID: .1.3.6.1.4.1.2356.800.3.2311.3.11.1.101
Type: scalar
Access: readwrite
Status: current
Parent: gs2310pNASConfiguration
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	disable
`1`	enable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
gs2310pNASConfigMode Indicates if NAS is globally enabled or disabled on the switch. If globally disabled, all ports are allowed forwarding of frames.	scalar	Enumeration	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.1`
gs2310pNASConfigGuestVLANID This is the value that a port's Port VLAN ID is set to if a port is moved into the Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled. range: 1 - 4094.	scalar	Integer32	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.10`
gs2310pNASConfigMaxReauthCount The number of times the switch transmits an EAPOL Request Identity frame without response before considering entering the Guest VLAN is adjusted with this setting. The value can…	scalar	Integer32	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.11`
gs2310pNASConfigAllowGuestVLANEAPOLSeen The switch remembers if an EAPOL frame has been received on the port for the life-time of the port. Once the switch considers whether to enter the Guest VLAN, it will first chec…	scalar	Enumeration	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.12`
gs2310pNASPortConfigTable	table	-	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.13`
gs2310pNASConfigReauthEnabled If checked, successfully authenticated supplicants/clients are reauthenticated after the interval specified by the Reauthentication Period. Reauthentication for 802.1X-enabled p…	scalar	Enumeration	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.2`
gs2310pNASConfigReauthPeriod Determines the period, in seconds, after which a connected client must be reauthenticated. This is only active if the Reauthentication Enabled checkbox is checked. range: 1 -…	scalar	Integer32	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.3`
gs2310pNASConfigEAPOLTimeout Determines the time for retransmission of Request Identity EAPOL frames. This has no effect for MAC-based ports. range: 1 - 65535 seconds.	scalar	Integer32	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.4`
gs2310pNASConfigAgingPeriod When the NAS module uses the Port Security module to secure MAC addresses, the Port Security module needs to check for activity on the MAC address in question at regular interv…	scalar	Integer32	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.5`
gs2310pNASConfigHoldTime If a client is denied access - either because the RADIUS server denies the client access or because the RADIUS server request times out - the client is put on hold in the Unauth…	scalar	Integer32	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.6`
gs2310pNASConfigRADIUSAssignedQoSEnabled RADIUS-assigned QoS provides a means to centrally control the traffic class to which traffic coming from a successfully authenticated supplicant is assigned on the switch. The …	scalar	Enumeration	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.7`
gs2310pNASConfigRADIUSAssignedVLANEnabled RADIUS-assigned VLAN provides a means to centrally control the VLAN on which a successfully authenticated supplicant is placed on the switch. Incoming traffic will be classified…	scalar	Enumeration	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.8`
gs2310pNASConfigGuestVLANEnabled A Guest VLAN is a special VLAN - typically with limited network access - on which 802.1X-unaware clients are placed after a network administrator-defined timeout. The switch fol…	scalar	Enumeration	`.1.3.6.1.4.1.2356.800.3.2311.3.11.1.9`