gs2310NASConfigMode
LANCOM-GS2310-MIB ·
.1.3.6.1.4.1.2356.800.3.2313.3.11.1.1
Object
scalar
r/w
Enumeration
Indicates if NAS is globally enabled or disabled on the switch. If globally disabled, all ports are allowed forwarding of frames.
Context
- MIB
- LANCOM-GS2310-MIB
- OID
.1.3.6.1.4.1.2356.800.3.2313.3.11.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- gs2310NASConfiguration
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gs2310NASConfigGuestVLANID This is the value that a port's Port VLAN ID is set to if a port is moved into
the Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled.
range: 1 - 4094. | scalar | Integer32 | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.10 |
| gs2310NASConfigMacBasedUseEAP The switch can do the RADIUS authentication on behalf of the client in the
MAC-based Auth. port authentication mode. It can either present itself as a
normal 802.1X client to the … | scalar | Enumeration | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.101 |
| gs2310NASConfigMaxReauthCount The number of times the switch transmits an EAPOL Request Identity frame without
response before considering entering the Guest VLAN is adjusted with this setting.
The value can… | scalar | Integer32 | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.11 |
| gs2310NASConfigAllowGuestVLANEAPOLSeen The switch remembers if an EAPOL frame has been received on the port for the
life-time of the port. Once the switch considers whether to enter the Guest VLAN,
it will first chec… | scalar | Enumeration | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.12 |
| gs2310NASPortConfigTable | table | - | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.13 |
| gs2310NASConfigReauthEnabled If checked, successfully authenticated supplicants/clients are
reauthenticated after the interval specified by the Reauthentication
Period. Reauthentication for 802.1X-enabled p… | scalar | Enumeration | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.2 |
| gs2310NASConfigReauthPeriod Determines the period, in seconds, after which a connected client must
be reauthenticated. This is only active if the Reauthentication Enabled
checkbox is checked.
range: 1 -… | scalar | Integer32 | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.3 |
| gs2310NASConfigEAPOLTimeout Determines the time for retransmission of Request Identity EAPOL frames.
This has no effect for MAC-based ports.
range: 1 - 65535 seconds. | scalar | Integer32 | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.4 |
| gs2310NASConfigAgingPeriod When the NAS module uses the Port Security module to secure MAC addresses,
the Port Security module needs to check for activity on the MAC address
in question at regular interv… | scalar | Integer32 | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.5 |
| gs2310NASConfigHoldTime If a client is denied access - either because the RADIUS server denies
the client access or because the RADIUS server request times out
- the client is put on hold in the Unauth… | scalar | Integer32 | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.6 |
| gs2310NASConfigRADIUSAssignedQoSEnabled RADIUS-assigned QoS provides a means to centrally control the
traffic class to which traffic coming from a successfully authenticated
supplicant is assigned on the switch. The … | scalar | Enumeration | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.7 |
| gs2310NASConfigRADIUSAssignedVLANEnabled RADIUS-assigned VLAN provides a means to centrally control the VLAN on
which a successfully authenticated supplicant is placed on the switch.
Incoming traffic will be classified… | scalar | Enumeration | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.8 |
| gs2310NASConfigGuestVLANEnabled A Guest VLAN is a special VLAN - typically with limited network access -
on which 802.1X-unaware clients are placed after a network administrator-defined
timeout. The switch fol… | scalar | Enumeration | .1.3.6.1.4.1.2356.800.3.2313.3.11.1.9 |