gs2328pQosQceRowStatus

LANCOM-GS-2328P-MIB · .1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.39
MIB view Table view

Object

column r/w Enumeration 
1: active2: notInservice 4: destroy

Context

MIB
LANCOM-GS-2328P-MIB
OID
.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.39
Type
column
Access
readwrite
Status
current
Parent
gs2328pQosQceEntry
Table
gs2328pQosQceTable
Siblings
38

Syntax

Enumeration

Values & Constraints

Enumerated Values
1active
2notInservice
4destroy

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gs2328pQosQceIndexcolumnInteger32.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.1
gs2328pQosDMACType
Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.10
gs2328pQosFrameType
Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6.
columnEnumeration.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.11
gs2328pQosMacEtherType
Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.12
gs2328pQosLLCSSAPAddr
Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.13
gs2328pQosLLCDSAPAddr
Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.14
gs2328pQosLLCControl
Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.15
gs2328pQosSNAPPID
Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.16
gs2328pQosIpv4Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.17
gs2328pQosIpv4ProtocolValue
Ipv4 Protocol is Other. range: 0-255 default: 0.
columnInteger32.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.18
gs2328pQosIpv4ProtocolUDPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.19
gs2328pQosQceID
If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256.
columnInteger32.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.2
gs2328pQosIpv4ProtocolUDPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.20
gs2328pQosIpv4ProtocolTCPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.21
gs2328pQosIpv4ProtocolTCPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.22
gs2328pQosIpv4Ip
Specific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.23
gs2328pQosIpv4Mask
Specific IP address in mask format or value 0.0.0.0 is 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.24
gs2328pQosIpv4IPFragment
IPv4 frame fragmented option: 2: yes, 1: no, 0: any.
columnEnumeration.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.25
gs2328pQosIpv4DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.26
gs2328pQosIpv6Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.27
gs2328pQosIpv6ProtocolValue
when IPv6 protocol is Other , range: 0-255.
columnInteger32.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.28
gs2328pQosIpv6ProtocolUDPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.29
gs2328pQosQceNextID
If the next QCE ID is non zero, the QCE will be placed before this QCE in the list. If the next QCE ID is zero, the QCE will be placed last in the list. range : 1 - 256.
columnInteger32.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.3
gs2328pQosIpv6ProtocolUDPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.30
gs2328pQosIpv6ProtocolTCPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.31
gs2328pQosIpv6ProtocolTCPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.32
gs2328pQosIpv6Ip
IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. If a port is configured to match on DMAC/DIP, this field is the Destination IP address.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.33
gs2328pQosIpv6Mask
IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.34
gs2328pQosIpv6DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.35
gs2328pQosActionClass
QoS class: (0-7) or 8: Default.
columnInteger32.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.36
gs2328pQosActionDPL
DP Valid Drop Precedence Level can be (0-3) or 4: Default.
columnInteger32.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.37
gs2328pQosActionDSCP
Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default.
columnInteger32.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.38
gs2328pQosQcePortMembers
Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.4
gs2328pQosQceTag
Value of Tag field can be 'Any', 'Untag' or 'Tag'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.5
gs2328pQosQceVID
Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.6
gs2328pQosPCP
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.7
gs2328pQosDEI
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.8
gs2328pQosSMAC
Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2331.2.14.9.2.1.9