gs2328pNASConfigGuestVLANEnabled

LANCOM-GS-2328P-MIB · .1.3.6.1.4.1.2356.800.3.2331.3.11.1.9
MIB view Table view

Object

scalar r/w Enumeration 
A Guest VLAN is a special VLAN - typically with limited network access - 
on which 802.1X-unaware clients are placed after a network administrator-defined 
timeout. The switch follows a set of rules for entering and leaving the Guest 
VLAN as listed below.When enable, the individual ports' ditto setting determines 
whether the port can be moved into Guest VLAN. When disable, the ability to 
move to the Guest VLAN is disabled on all ports.

Context

MIB
LANCOM-GS-2328P-MIB
OID
.1.3.6.1.4.1.2356.800.3.2331.3.11.1.9
Type
scalar
Access
readwrite
Status
current
Parent
gs2328pNASConfiguration
Siblings
13

Syntax

Enumeration

Values & Constraints

Enumerated Values
0disable
1enable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gs2328pNASConfigMode
Indicates if NAS is globally enabled or disabled on the switch. If globally disabled, all ports are allowed forwarding of frames.
scalarEnumeration.1.3.6.1.4.1.2356.800.3.2331.3.11.1.1
gs2328pNASConfigGuestVLANID
This is the value that a port's Port VLAN ID is set to if a port is moved into the Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled. range: 1 - 4094.
scalarInteger32.1.3.6.1.4.1.2356.800.3.2331.3.11.1.10
gs2328pNASConfigMacBasedUseEAP
The switch can do the RADIUS authentication on behalf of the client in the MAC-based Auth. port authentication mode. It can either present itself as a normal 802.1X client to the …
scalarEnumeration.1.3.6.1.4.1.2356.800.3.2331.3.11.1.101
gs2328pNASConfigMaxReauthCount
The number of times the switch transmits an EAPOL Request Identity frame without response before considering entering the Guest VLAN is adjusted with this setting. The value can…
scalarInteger32.1.3.6.1.4.1.2356.800.3.2331.3.11.1.11
gs2328pNASConfigAllowGuestVLANEAPOLSeen
The switch remembers if an EAPOL frame has been received on the port for the life-time of the port. Once the switch considers whether to enter the Guest VLAN, it will first chec…
scalarEnumeration.1.3.6.1.4.1.2356.800.3.2331.3.11.1.12
gs2328pNASPortConfigTabletable-.1.3.6.1.4.1.2356.800.3.2331.3.11.1.13
gs2328pNASConfigReauthEnabled
If checked, successfully authenticated supplicants/clients are reauthenticated after the interval specified by the Reauthentication Period. Reauthentication for 802.1X-enabled p…
scalarEnumeration.1.3.6.1.4.1.2356.800.3.2331.3.11.1.2
gs2328pNASConfigReauthPeriod
Determines the period, in seconds, after which a connected client must be reauthenticated. This is only active if the Reauthentication Enabled checkbox is checked. range: 1 -…
scalarInteger32.1.3.6.1.4.1.2356.800.3.2331.3.11.1.3
gs2328pNASConfigEAPOLTimeout
Determines the time for retransmission of Request Identity EAPOL frames. This has no effect for MAC-based ports. range: 1 - 65535 seconds.
scalarInteger32.1.3.6.1.4.1.2356.800.3.2331.3.11.1.4
gs2328pNASConfigAgingPeriod
When the NAS module uses the Port Security module to secure MAC addresses, the Port Security module needs to check for activity on the MAC address in question at regular interv…
scalarInteger32.1.3.6.1.4.1.2356.800.3.2331.3.11.1.5
gs2328pNASConfigHoldTime
If a client is denied access - either because the RADIUS server denies the client access or because the RADIUS server request times out - the client is put on hold in the Unauth…
scalarInteger32.1.3.6.1.4.1.2356.800.3.2331.3.11.1.6
gs2328pNASConfigRADIUSAssignedQoSEnabled
RADIUS-assigned QoS provides a means to centrally control the traffic class to which traffic coming from a successfully authenticated supplicant is assigned on the switch. The …
scalarEnumeration.1.3.6.1.4.1.2356.800.3.2331.3.11.1.7
gs2328pNASConfigRADIUSAssignedVLANEnabled
RADIUS-assigned VLAN provides a means to centrally control the VLAN on which a successfully authenticated supplicant is placed on the switch. Incoming traffic will be classified…
scalarEnumeration.1.3.6.1.4.1.2356.800.3.2331.3.11.1.8