gs2328QosQceRowStatus

LANCOM-GS-2328-MIB · .1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.39
MIB view Table view

Object

column r/w Enumeration 
1: active2: notInservice 4: destroy

Context

MIB
LANCOM-GS-2328-MIB
OID
.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.39
Type
column
Access
readwrite
Status
current
Parent
gs2328QosQceEntry
Table
gs2328QosQceTable
Siblings
38

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gs2328QosQceIndexcolumnInteger32.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.1
gs2328QosDMACType
Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.10
gs2328QosFrameType
Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6.
columnEnumeration.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.11
gs2328QosMacEtherType
Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.12
gs2328QosLLCSSAPAddr
Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.13
gs2328QosLLCDSAPAddr
Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.14
gs2328QosLLCControl
Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.15
gs2328QosSNAPPID
Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.16
gs2328QosIpv4Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.17
gs2328QosIpv4ProtocolValue
Ipv4 Protocol is Other. range: 0-255 default: 0.
columnInteger32.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.18
gs2328QosIpv4ProtocolUDPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.19
gs2328QosQceID
If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256.
columnInteger32.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.2
gs2328QosIpv4ProtocolUDPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.20
gs2328QosIpv4ProtocolTCPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.21
gs2328QosIpv4ProtocolTCPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.22
gs2328QosIpv4Ip
Specific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.23
gs2328QosIpv4Mask
Specific IP address in mask format or value 0.0.0.0 is 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.24
gs2328QosIpv4IPFragment
IPv4 frame fragmented option: 2: yes, 1: no, 0: any.
columnEnumeration.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.25
gs2328QosIpv4DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.26
gs2328QosIpv6Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.27
gs2328QosIpv6ProtocolValue
when IPv6 protocol is Other , range: 0-255.
columnInteger32.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.28
gs2328QosIpv6ProtocolUDPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.29
gs2328QosQceNextID
If the next QCE ID is non zero, the QCE will be placed before this QCE in the list. If the next QCE ID is zero, the QCE will be placed last in the list. range : 1 - 256.
columnInteger32.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.3
gs2328QosIpv6ProtocolUDPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.30
gs2328QosIpv6ProtocolTCPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.31
gs2328QosIpv6ProtocolTCPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.32
gs2328QosIpv6Ip
IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. If a port is configured to match on DMAC/DIP, this field is the Destination IP address.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.33
gs2328QosIpv6Mask
IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.34
gs2328QosIpv6DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.35
gs2328QosActionClass
QoS class: (0-7) or 8: Default.
columnInteger32.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.36
gs2328QosActionDPL
DP Valid Drop Precedence Level can be (0-3) or 4: Default.
columnInteger32.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.37
gs2328QosActionDSCP
Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default.
columnInteger32.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.38
gs2328QosQcePortMembers
Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.4
gs2328QosQceTag
Value of Tag field can be 'Any', 'Untag' or 'Tag'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.5
gs2328QosQceVID
Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.6
gs2328QosPCP
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.7
gs2328QosDEI
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.8
gs2328QosSMAC
Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2330.2.14.9.2.1.9