gs2328MLDSnoopingVLANLLQI
LANCOM-GS-2328-MIB ·
.1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.8
Object
column
r/w
Integer32
LLQI (LMQI for MLD). Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 in tenths of seconds, default last member query interval is 10 in tenths of seconds (1 second). (-1: none)
Context
- MIB
- LANCOM-GS-2328-MIB
- OID
.1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- gs2328MLDSnoopingVLANEntry
- Table
- gs2328MLDSnoopingVLANTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Enumerated Values
1 | active |
2 | notInservice |
4 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gs2328MLDSnoopingVLANID The VLAN ID of the entry | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.1 |
| gs2328MLDSnoopingVLANEnable Enable/Disable the per-VLAN MLD Snooping. Up to 32 VLANs can be
selected for MLD Snooping. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.2 |
| gs2328MLDSnoopingVLANIGMPQuerier Enable/Disable the MLD Querier in the VLAN. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.3 |
| gs2328MLDSnoopingVLANCompatibility Compatibility is maintained by hosts and routers taking appropriate
actions depending on the versions of IGMP operating on hosts and routers
within a network. The allowed selectio… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.4 |
| gs2328MLDSnoopingVLANRV Robustness Variable. The Robustness Variable allows tuning for the
expected packet loss on a network. The allowed range is 1 to 255, default
robustness variable value is 2. (-1: … | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.5 |
| gs2328MLDSnoopingVLANQI Query Interval. The Query Interval is the interval between General
Queries sent by the Querier. The allowed range is 1 to 31744 seconds,
default query interval is 125 seconds. (-… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.6 |
| gs2328MLDSnoopingVLANQRI Query Response Interval. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries. The
allowed range is 0 to 31744 in ten… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.7 |
| gs2328MLDSnoopingVLANURI Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 … | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.17.2.1.9 |