gs2328ACLACESourcePortMax
LANCOM-GS-2328-MIB ·
.1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.43
Object
column
r/w
Integer32
Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536
Context
- MIB
- LANCOM-GS-2328-MIB
- OID
.1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.43- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- gs2328ACLACEEntry
- Table
- gs2328ACLACETable
- Siblings
- 49
Syntax
Integer32
Values & Constraints
Enumerated Values
0 | unset |
1 | set |
2 | any |
3 | noData |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gs2328ACLACEIndex | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.1 |
| gs2328ACLACELogging default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.10 |
| gs2328ACLACEMirror default: 0,
0: disable - Frames matching the ACE are not mirrored.
1: enable - Frames matching the ACE are mirrored. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.11 |
| gs2328ACLACERateLimiter default: 0,
0: Disable
range : 0 - 12 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.12 |
| gs2328ACLACEShutdown default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.13 |
| gs2328ACLACEVLAN8021QTagged Specify whether frames can hit the action according to the 802.1Q tagged.
default: 2,
0: disable - Untagged frame only.
1: enable - Tagged frame only.
2: Any - Any value is allow… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.14 |
| gs2328ACLACEVLANTagPriority Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.15 |
| gs2328ACLACEVLANVID Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.16 |
| gs2328ACLACEEtherType 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff). | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.17 |
| gs2328ACLACESMAC Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.18 |
| gs2328ACLACEDMACType DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address.
ran… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.19 |
| gs2328ACLACEID If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256. | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.2 |
| gs2328ACLACEDMAC Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Fram… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.20 |
| gs2328ACLACEArpOpcode Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 4 | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.21 |
| gs2328ACLACEArpFlagsRequestReply Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP fla… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.22 |
| gs2328ACLACEArpFlagsArpSmac Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1:… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.23 |
| gs2328ACLACEArpFlagsRarpDmac Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.24 |
| gs2328ACLACEArpFlagsLength Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames wher… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.25 |
| gs2328ACLACEArpFlagsIp Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.26 |
| gs2328ACLACEArpFlagsEthernet Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x80… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.27 |
| gs2328ACLACESIPType Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.28 |
| gs2328ACLACESIPIPAddress A frame that hits this ACE matches this source IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.29 |
| gs2328ACLACENextID If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256. | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.3 |
| gs2328ACLACESIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.30 |
| gs2328ACLACEDIPType Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.32 |
| gs2328ACLACEDIPIPAddress A frame that hits this ACE matches this destination IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.33 |
| gs2328ACLACEDIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.34 |
| gs2328ACLACEIPProtocol Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.36 |
| gs2328ACLACEIPFlagsTTL Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2:… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.37 |
| gs2328ACLACEIPFlagsOptions Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.38 |
| gs2328ACLACEIPFlagsFragment Configure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is s… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.39 |
| gs2328ACLACEIngressPort Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.4 |
| gs2328ACLACEICMPType Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.40 |
| gs2328ACLACEICMPCode Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.41 |
| gs2328ACLACESourcePortMin Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.42 |
| gs2328ACLACEDestPortMin Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.44 |
| gs2328ACLACEDestPortMax Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.45 |
| gs2328ACLACETCPFlagsFin Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.46 |
| gs2328ACLACETCPFlagsSyn Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.47 |
| gs2328ACLACETCPFlagsRst Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.48 |
| gs2328ACLACETCPFlagsPsh Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.49 |
| gs2328ACLACEPortPolicyNumber policy value.
range : 0 - 255. | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.5 |
| gs2328ACLACETCPFlagsAck Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.50 |
| gs2328ACLACETCPFlagsUrg Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.51 |
| gs2328ACLACEPortPolicyBitmask policy bitmask.
range : 0 - 255(0xff). | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.6 |
| gs2328ACLACERowStatus 1: active
2: notInservice
4: destroy
5: undo | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.66 |
| gs2328ACLACEFrameType 0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.7 |
| gs2328ACLACEAction default: 1,
0: Deny
1: Permit | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.8 |
| gs2328ACLACEDenyPortRedirect Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.800.3.2330.2.9.3.2.1.9 |