gs2326pplusQosIpv4Ip

LANCOM-GS-2326PPLUS-MIB · .1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.23
MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
Specific Source IP address in value format or value 0.0.0.0 is 'Any'.
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
(x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223.
If a port is configured to match on DMAC/DIP, this field is the
Destination IP address.

Context

MIB
LANCOM-GS-2326PPLUS-MIB
OID
.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.23
Type
column
Access
readwrite
Status
current
Parent
gs2326pplusQosQceEntry
Table
gs2326pplusQosQceTable
Siblings
38

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
gs2326pplusQosQceIndexcolumnInteger32.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.1
gs2326pplusQosDMACType
Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.10
gs2326pplusQosFrameType
Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6.
columnEnumeration.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.11
gs2326pplusQosMacEtherType
Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.12
gs2326pplusQosLLCSSAPAddr
Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.13
gs2326pplusQosLLCDSAPAddr
Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.14
gs2326pplusQosLLCControl
Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.15
gs2326pplusQosSNAPPID
Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.16
gs2326pplusQosIpv4Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.17
gs2326pplusQosIpv4ProtocolValue
Ipv4 Protocol is Other. range: 0-255 default: 0.
columnInteger32.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.18
gs2326pplusQosIpv4ProtocolUDPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.19
gs2326pplusQosQceID
If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256.
columnInteger32.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.2
gs2326pplusQosIpv4ProtocolUDPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.20
gs2326pplusQosIpv4ProtocolTCPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.21
gs2326pplusQosIpv4ProtocolTCPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.22
gs2326pplusQosIpv4Mask
Specific IP address in mask format or value 0.0.0.0 is 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.24
gs2326pplusQosIpv4IPFragment
IPv4 frame fragmented option: 2: yes, 1: no, 0: any.
columnEnumeration.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.25
gs2326pplusQosIpv4DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.26
gs2326pplusQosIpv6Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.27
gs2326pplusQosIpv6ProtocolValue
when IPv6 protocol is Other , range: 0-255.
columnInteger32.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.28
gs2326pplusQosIpv6ProtocolUDPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.29
gs2326pplusQosQceNextID
If the next QCE ID is non zero, the QCE will be placed before this QCE in the list. If the next QCE ID is zero, the QCE will be placed last in the list. range : 1 - 256.
columnInteger32.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.3
gs2326pplusQosIpv6ProtocolUDPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.30
gs2326pplusQosIpv6ProtocolTCPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.31
gs2326pplusQosIpv6ProtocolTCPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.32
gs2326pplusQosIpv6Ip
IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. If a port is configured to match on DMAC/DIP, this field is the Destination IP address.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.33
gs2326pplusQosIpv6Mask
IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.34
gs2326pplusQosIpv6DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.35
gs2326pplusQosActionClass
QoS class: (0-7) or 8: Default.
columnInteger32.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.36
gs2326pplusQosActionDPL
DP Valid Drop Precedence Level can be (0-3) or 4: Default.
columnInteger32.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.37
gs2326pplusQosActionDSCP
Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default.
columnInteger32.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.38
gs2326pplusQosQceRowStatus
1: active2: notInservice 4: destroy
columnEnumeration.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.39
gs2326pplusQosQcePortMembers
Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.4
gs2326pplusQosQceTag
Value of Tag field can be 'Any', 'Untag' or 'Tag'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.5
gs2326pplusQosQceVID
Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.6
gs2326pplusQosPCP
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.7
gs2326pplusQosDEI
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.8
gs2326pplusQosSMAC
Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.800.3.2328.2.14.9.2.1.9