gs2326plusACLACEIPFlagsFragment
LANCOM-GS-2326PLUS-MIB ·
.1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.39
Object
column
r/w
Integer32
Configure IP fragment offset flags for this ACE. default: 2, 0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero. 1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero. 2: Any - Don't care. 3: No data. range : 0 - 3
Context
- MIB
- LANCOM-GS-2326PLUS-MIB
- OID
.1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.39- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- gs2326plusACLACEEntry
- Table
- gs2326plusACLACETable
- Siblings
- 49
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gs2326plusACLACEIndex | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.1 |
| gs2326plusACLACELogging default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.10 |
| gs2326plusACLACEMirror default: 0,
0: disable - Frames matching the ACE are not mirrored.
1: enable - Frames matching the ACE are mirrored. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.11 |
| gs2326plusACLACERateLimiter default: 0,
0: Disable
range : 0 - 12 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.12 |
| gs2326plusACLACEShutdown default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.13 |
| gs2326plusACLACEVLAN8021QTagged Specify whether frames can hit the action according to the 802.1Q tagged.
default: 2,
0: disable - Untagged frame only.
1: enable - Tagged frame only.
2: Any - Any value is allow… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.14 |
| gs2326plusACLACEVLANTagPriority Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.15 |
| gs2326plusACLACEVLANVID Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.16 |
| gs2326plusACLACEEtherType 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff). | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.17 |
| gs2326plusACLACESMAC Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.18 |
| gs2326plusACLACEDMACType DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address.
ran… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.19 |
| gs2326plusACLACEID If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256. | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.2 |
| gs2326plusACLACEDMAC Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Fram… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.20 |
| gs2326plusACLACEArpOpcode Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 4 | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.21 |
| gs2326plusACLACEArpFlagsRequestReply Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP fla… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.22 |
| gs2326plusACLACEArpFlagsArpSmac Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1:… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.23 |
| gs2326plusACLACEArpFlagsRarpDmac Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.24 |
| gs2326plusACLACEArpFlagsLength Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames wher… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.25 |
| gs2326plusACLACEArpFlagsIp Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.26 |
| gs2326plusACLACEArpFlagsEthernet Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x80… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.27 |
| gs2326plusACLACESIPType Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.28 |
| gs2326plusACLACESIPIPAddress A frame that hits this ACE matches this source IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.29 |
| gs2326plusACLACENextID If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256. | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.3 |
| gs2326plusACLACESIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.30 |
| gs2326plusACLACEDIPType Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.32 |
| gs2326plusACLACEDIPIPAddress A frame that hits this ACE matches this destination IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.33 |
| gs2326plusACLACEDIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.34 |
| gs2326plusACLACEIPProtocol Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.36 |
| gs2326plusACLACEIPFlagsTTL Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2:… | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.37 |
| gs2326plusACLACEIPFlagsOptions Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
… | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.38 |
| gs2326plusACLACEIngressPort Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.4 |
| gs2326plusACLACEICMPType Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.40 |
| gs2326plusACLACEICMPCode Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.41 |
| gs2326plusACLACESourcePortMin Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.42 |
| gs2326plusACLACESourcePortMax Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.43 |
| gs2326plusACLACEDestPortMin Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.44 |
| gs2326plusACLACEDestPortMax Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.45 |
| gs2326plusACLACETCPFlagsFin Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.46 |
| gs2326plusACLACETCPFlagsSyn Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.47 |
| gs2326plusACLACETCPFlagsRst Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.48 |
| gs2326plusACLACETCPFlagsPsh Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.49 |
| gs2326plusACLACEPortPolicyNumber policy value.
range : 0 - 255. | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.5 |
| gs2326plusACLACETCPFlagsAck Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.50 |
| gs2326plusACLACETCPFlagsUrg Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.51 |
| gs2326plusACLACEPortPolicyBitmask policy bitmask.
range : 0 - 255(0xff). | column | Integer32 | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.6 |
| gs2326plusACLACERowStatus 1: active
2: notInservice
4: destroy
5: undo | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.66 |
| gs2326plusACLACEFrameType 0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp. | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.7 |
| gs2326plusACLACEAction default: 1,
0: Deny
1: Permit | column | Enumeration | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.8 |
| gs2326plusACLACEDenyPortRedirect Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.800.3.2329.2.9.3.2.1.9 |