vrrpInstancePreemptDelay

KEEPALIVED-MIB · .1.3.6.1.4.1.9586.100.5.2.3.1.14
MIB view Table view

Object

column seconds SNMPv2-SMIUnsigned32 
Delay after startup until preemption can happen. 0 means that
there is no delay.

Context

MIB
KEEPALIVED-MIB
OID
.1.3.6.1.4.1.9586.100.5.2.3.1.14
Type
column
Access
readonly
Status
current
Units
seconds
Parent
vrrpInstanceEntry
Table
vrrpInstanceTable
Siblings
25

Syntax

seconds SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vrrpInstanceIndex
Index of the VRRP instance. Instance 0 is for static IP and static routes.
columnEnumeration.1.3.6.1.4.1.9586.100.5.2.3.1.1
vrrpInstancePrimaryInterface
Primary interface of this VRRP instance.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.9586.100.5.2.3.1.10
vrrpInstanceTrackPrimaryIf
Do we track the status of the primary interface?
columnEnumeration.1.3.6.1.4.1.9586.100.5.2.3.1.11
vrrpInstanceAdvertisementsInt
Delay in seconds between two VRRP advertisements.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9586.100.5.2.3.1.12
vrrpInstancePreempt
Will a higher priority advertisement preempt a lower instance?
columnEnumeration.1.3.6.1.4.1.9586.100.5.2.3.1.13
vrrpInstanceAuthType
Authentication method to authenticate other peers.
columnEnumeration.1.3.6.1.4.1.9586.100.5.2.3.1.15
vrrpInstanceLvsSyncDaemon
Is LVS sync daemon enabled for this VRRP instance?
columnEnumeration.1.3.6.1.4.1.9586.100.5.2.3.1.16
vrrpInstanceLvsSyncInterface
If LVS sync daemon is enabled, which interface to use for syncing?
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.9586.100.5.2.3.1.17
vrrpInstanceSyncGroup
Name of the synchronisation group this VRRP instance belongs, if any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.9586.100.5.2.3.1.18
vrrpInstanceGarpDelay
Delay to launch gratuitous ARP (GARP).
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9586.100.5.2.3.1.19
vrrpInstanceName
Name of the VRRP instance.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.9586.100.5.2.3.1.2
vrrpInstanceSmtpAlert
Will SMTP alert be sent for this VRRP instance?
columnEnumeration.1.3.6.1.4.1.9586.100.5.2.3.1.20
vrrpInstanceNotifyExec
Will we execute notification script for this instance?
columnEnumeration.1.3.6.1.4.1.9586.100.5.2.3.1.21
vrrpInstanceScriptMaster
Script to execute when the instance becomes master.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.9586.100.5.2.3.1.22
vrrpInstanceScriptBackup
Script to execute when the instance becomes backup.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.9586.100.5.2.3.1.23
vrrpInstanceScriptFault
Script to execute when the instance is in fault state.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.9586.100.5.2.3.1.24
vrrpInstanceScriptStop
Script to execute when the instance is stopped.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.9586.100.5.2.3.1.25
vrrpInstanceScript
Script to execute whenever a state change occurs.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.9586.100.5.2.3.1.26
vrrpInstanceVirtualRouterId
Virtual Router ID (VRID) for this VRRP instance.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9586.100.5.2.3.1.3
vrrpInstanceState
Current state of this VRRP instance.
columnVrrpState.1.3.6.1.4.1.9586.100.5.2.3.1.4
vrrpInstanceInitialState
Initial state of this VRRP instance.
columnVrrpState.1.3.6.1.4.1.9586.100.5.2.3.1.5
vrrpInstanceWantedState
State wanted by the operator for this VRRP instance.
columnVrrpState.1.3.6.1.4.1.9586.100.5.2.3.1.6
vrrpInstanceBasePriority
Base priority (as defined in the configuration file) for this VRRP instance. This value can be modified to force the virtual router instance to become backup or mas…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.9586.100.5.2.3.1.7
vrrpInstanceEffectivePriority
Effective priority for this VRRP instance. Status of interfaces and script results are used to compute this value from the base priority.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.9586.100.5.2.3.1.8
vrrpInstanceVipsStatus
Are all VIP of this VRRP instance enabled?
columnEnumeration.1.3.6.1.4.1.9586.100.5.2.3.1.9