juniPimMRouteNextHopHasOifSendAssert

Juniper-PIM-MIB · .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.14
MIB view Table view

Object

column SNMPv2-TCTruthValue 
This object indicates whether or not this interface is going to send an
assert at the end of assert suppression interval.  Assert suppression is
used to prevent a flood of assert to be generated in response to data or
other asserts.

Context

MIB
Juniper-PIM-MIB
OID
.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.14
Type
column
Access
readonly
Status
current
Parent
juniPimMRouteNextHopEntry
Table
juniPimMRouteNextHopTable
Siblings
23

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniPimMRouteNextHopJoinTypeG
This object indicates whether or not the interface was added as a result of receiving <*, G> join in case of <*, G> entry OR inherited as outgoing interface from corresponding <*,…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.10
juniPimMRouteNextHopJoinTypeSG
This object indicates whether or not the interface was added as a result of receiving <S, G> join in case of <S, G> entry.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.11
juniPimMRouteNextHopHasLGM
This object indicates whether or not the interface has local group membership (as indicated by IGMP) in case of <*, G> and <S, G> entries.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.12
juniPimMRouteNextHopHasOifAW
This object indicates whether or not this interface is the winner of assert for corresponding <*, G>/<S, G> entry.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.13
juniPimMRouteNextHopHasOifRegister
This object indicates whether or not this next hop is a register outgoing interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.15
juniPimMRouteNextHopHasOifBorderBit
This object is used to describe a register outgoing interface. It indicates whether or not the border bit is set in the register packet when the packet is sent over the register …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.16
juniPimMRouteNextHopHasOifNullEncapsBit
This object is used to describe a register outgoing interface. It indicates whether or not the NULL encapsulation bit is set (periodically) in the register packet when the packet…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.17
juniPimMRouteNextHopJoinEndTimer
This object indicates the time (in seconds) left when the join timer expires for the outgoing interface. Join timer for an outgoing interface of <S, G> entry indicates when the <…
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.18
juniPimMRouteNextHopAssertEndTimer
This object indicates the time (in seconds) left when the assert timer expires on this outgoing inteface.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.19
juniPimMRouteNextHopGroupAddr
The group address. Specified as 224.0.0.0 for <*, *, RP> entries.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.2
juniPimMRouteNextHopNextAssertTimer
This object indicates the duration (in seconds) left for which sending an assert has been suppressed on this outgoing interface.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.20
juniPimMRouteNextHopAssertSrcAddress
This object indicates the source address which will be used in the assert packet to send an assert out for the entry on this outgoing interface. For <S, G> entries it is the addr…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.21
juniPimMRouteNextHopRegisterSuppressionTimer
This object is used for register outgoing interfaces. It indicates the duration (in seconds) left for which sending a register packet has been suppressed on the register outgoing…
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.22
juniPimMRouteNextHopPimType
This object indicates whether the outgoing interface was contributed by sparse-mode or dense-mode PIM.
columnJuniPimType.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.23
juniPimMRouteNextHopPruneTimeLeft
This object indicates the time (in seconds) left when the prune timer expires on an outgoing inteface. Its used for pruned outgoing interfaces contributed by dense-mode PIM.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.24
juniPimMRouteNextHopsendingIpAddress
This object describes the source IP address used by this interface to send PIM packets out on this outgoing interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.25
juniPimMRouteNextHopSrcAddr
The source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.3
juniPimMRouteNextHopSrcMask
The source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.4
juniPimMRouteNextHopRPAddr
The RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.5
juniPimMRouteNextHopIfId
The interface index of the outgoing interface (next hop). Specified as 0 for register outgoing interface. Register outgoing interfaces are created by DR on the source subnet to …
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.6
juniPimMRouteNextHopAddress
This object takes following different values based on the type of next hop. It should be set to the address of RP in case the next hop interface is register interface i.e. juniPi…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.7
juniPimMRouteNextHopPruneReason
This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing.
columnEnumeration.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.8
juniPimMRouteNextHopJoinTypeSSRP
This object indicates whether or not the interface was added as a result of receiving <*, *, RP> join in case of <*, *, RP> entry OR inherited as outgoing interface from correspon…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.43.1.1.13.1.9