juniL2tpTunnelStatusRecvWindowSize

Juniper-L2TP-MIB · .1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.14
MIB view Table view

Object

column SNMPv2-SMIGauge32 
The receive window size.

Context

MIB
Juniper-L2TP-MIB
OID
.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.14
Type
column
Access
readonly
Status
current
Parent
juniL2tpTunnelStatusEntry
Table
juniL2tpTunnelStatusTable
Siblings
27

Syntax

SNMPv2-SMIGauge32
Source
SNMPv2-SMIGauge32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniL2tpTunnelStatusIfIndex
Same as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.1
juniL2tpTunnelStatusRemoteFirmwareRevision
The tunnel peer's firmware revision number. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero value if no revision was p…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10
juniL2tpTunnelStatusRemoteProtocolVersion
The protocol version and revision of the tunnel peer's implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
columnOctetString.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.11
juniL2tpTunnelStatusRemoteBearerCapabilities
The Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not previously known.
columnEnumeration.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.12
juniL2tpTunnelStatusRemoteFramingCapabilities
The Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not previously known.
columnEnumeration.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.13
juniL2tpTunnelStatusSendWindowSize
The tunnel peer's receive window size.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.15
juniL2tpTunnelStatusSendQueueDepth
Number of control packets on transmit queue.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.16
juniL2tpTunnelStatusRecvSeq
The next sequence number expected in a received control packet.
columnInteger32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.17
juniL2tpTunnelStatusRecvSeqAck
The last received sequence number that was acknowledged back to the tunnel peer.
columnInteger32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.18
juniL2tpTunnelStatusSendSeq
The next sequence number to be sent in a transmitted control packet.
columnInteger32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.19
juniL2tpTunnelStatusTransport
The underlying transport over which this L2TP tunnel is carried.
columnJuniL2tpTransport.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.2
juniL2tpTunnelStatusSendSeqAck
The send sequence number that the tunnel peer has acknowledged. The flow control state can be determined by subtracting the juniL2tpTunnelStatusSendSeq from juniL2tpTunnelStatusSe…
columnInteger32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.20
juniL2tpTunnelStatusTotalSessions
The total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created, including those that have since terminated.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.21
juniL2tpTunnelStatusFailedSessions
The number of sessions that were initiated but failed to reach the established phase.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.22
juniL2tpTunnelStatusActiveSessions
The current number of sessions in the established state.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.23
juniL2tpTunnelStatusLastResultCode
The last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect.
columnInteger32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.24
juniL2tpTunnelStatusLastErrorCode
The last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect.
columnInteger32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.25
juniL2tpTunnelStatusLastErrorMessage
The last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.26
juniL2tpTunnelStatusCumEstabTime
The cumulative time in seconds that this tunnel, since first being created, has spent in the established state (which may be punctuated by intervals outside the established state).
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.27
juniL2tpTunnelStatusEffectiveFailoverResync
The mechanism employed following failover to resynchronize with the L2TP peer.
columnInteger32.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.28
juniL2tpTunnelStatusLocalTunnelId
The local tunnel identifier.
columnJuniL2tpTunnelId.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.3
juniL2tpTunnelStatusRemoteTunnelId
The remote tunnel identifier.
columnJuniL2tpTunnelId.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.4
juniL2tpTunnelStatusEffectiveAdminState
The administrative state currently in effect. This could be the configured admin state for this tunnel, or an overriding admin state exerted from a higher hierarchical level (sys…
columnJuniL2tpAdminState.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.5
juniL2tpTunnelStatusState
The current state of the tunnel.
columnEnumeration.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.6
juniL2tpTunnelStatusInitiated
Indicates whether the tunnel was initiated locally, or by the remote tunnel peer.
columnEnumeration.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.7
juniL2tpTunnelStatusRemoteHostName
The host name obtained during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle, this object should maintain its value from the last …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8
juniL2tpTunnelStatusRemoteVendorName
Identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle, this object should maintain its value from the last time it was connected, of a zero-length st…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.9