juniIpProfileTcpMss

Juniper-IP-PROFILE-MIB · .1.3.6.1.4.1.4874.2.2.26.1.1.1.1.15
MIB view Table view

Object

column r/w Integer32 
Configures TCP MSS value for an IP interface.  When configured, 
MSS value of TCP SYN packets received or transmitted on the 
interface will be compared with the configured value and lowest 
of the two will replace the value in the packet.

Context

MIB
Juniper-IP-PROFILE-MIB
OID
.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.15
Type
column
Access
readwrite
Status
current
Parent
juniIpProfileEntry
Table
juniIpProfileTable
Siblings
17

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-0 range: 160-10240

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniIpProfileId
The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.1
juniIpProfileLoopbackIfIndex obsolete
For unnumbered interfaces, the IfIndex of the IP loopback interface whose IP address is used as the source address for transmitted IP packets. A value of zero means the loopback …
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.10
juniIpProfileLoopback obsolete
The number of the loopback interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remot…
columnInteger32.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.11
juniIpProfileSetMap
A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The …
columnJuniper-TCJuniSetMap.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.12
juniIpProfileSrcAddrValidEnable
Enable/disable whether source addresses in received IP packets are validated. Validation is performed by looking up the source IP address in the routing database and determining w…
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.13
juniIpProfileInheritNumString
The text identifier of the numbered interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbe…
columnOctetString.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.14
juniIpProfileFilterOptionsAll
Enable/disable whether IP packets containing options are to be discarded or sent to the control plane for processing.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.16
juniIpProfileFlowStats
Enable/disable whether J-Flow is enabled on the interface
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.17
juniIpProfileBlockMulticastSources
Enable/disable Blocking Multicast traffic
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.18
juniIpProfileRowStatus deprecated
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. The value of juniIpProfileId must match that of a prof…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.2
juniIpProfileRouterName
The virtual router to which an IP interface configured by this profile will be assigned, if other mechanisms do not otherwise specify a virtual router assignment.
columnJuniper-TCJuniName.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.3
juniIpProfileIpAddr
An IP address to be used by an IP interface configured by this profile. This object will have a value of 0.0.0.0 for an unnumbered interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.4
juniIpProfileIpMask
An IP address mask to be used by an IP interface configured by this profile. This object will have a value of 0.0.0.0 for an unnumbered interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.5
juniIpProfileDirectedBcastEnable
Enable/disable forwarding of directed broadcasts on this IP network interface.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.6
juniIpProfileIcmpRedirectEnable
Enable/disable transmission of ICMP Redirect messages on this IP network interface.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.7
juniIpProfileAccessRoute
Enable/disable whether a host route is automatically created for a remote host attached to an IP interface that is configured using this profile.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.8
juniIpProfileMtu
The configured MTU size for this IP network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.
columnInteger32.1.3.6.1.4.1.4874.2.2.26.1.1.1.1.9