juniIpAdEntAdminStatus
Juniper-IP-MIB ·
.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.7
Object
Enable/disable operation of IP on this IP network interface.
Context
- MIB
- Juniper-IP-MIB
- OID
.1.3.6.1.4.1.4874.2.2.12.1.2.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniIpAddrEntry
- Table
- juniIpAddrTable
- Siblings
- 20
Syntax
Juniper-TCJuniEnable
- Source
- Juniper-TCJuniEnable
- Base type
Enumeration
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniIpAdEntAddr The IP address for a numbered IP network interface, if this object's
value has the form 'a.b.c.d', where 'a' is nonzero; or, the ifIndex
(interpreting the low 24 bits of this valu… | column | Juniper-TCJuniIpAddrLessIf | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.1 |
| juniIpAdEntIgmpEnable deprecated Enable/disable IGMP operation on this IP network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.10 |
| juniIpAdEntDirectedBcastEnable Enable/disable forwarding of directed broadcasts on this IP network
interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.11 |
| juniIpAdEntIcmpRedirectEnable Enable/disable transmission of ICMP Redirect messages on this IP
network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.12 |
| juniIpAdEntIcmpMaskReplyEnable Enable/disable transmission of ICMP Mask Reply messages on this IP
network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.13 |
| juniIpAdEntIcmpUnreachEnable Enable/disable transmission of ICMP Unreachable messages on this IP
network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.14 |
| juniIpAdEntMtu The configured MTU size for this IP network interface. If set to zero,
the default MTU size, as determined by the underlying network media, is
used. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.15 |
| juniIpAdEntUnnumLoopbackIfIndex deprecated For unnumbered interfaces, the ifIndex of the IP loopback interface
whose IP address is used as the source IP address for IP packets
transmitted on the unnumbered network.
… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.16 |
| juniIpAdEntIrdpEnable Controls whether ICMP Router Discovery Protocol operation is permitted
to be sent on this network. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.17 |
| juniIpAdEntAccessRouteEnable If enabled, then establishment/loss of a point-to-point network
connection causes a host route for the remote host to be created/deleted
automatically. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.18 |
| juniIpAdEntAccessRouteHost If an access route has been established, the IP address of the remote
host is reported by this object; otherwise, this object contains the
value 0.0.0.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.19 |
| juniIpAdEntIfIndex The ifIndex of the network interface to which this entry's IP
addressing mode pertains. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.2 |
| juniIpAdEntIsSecondary If enabled, then the IP address corresponding to this entry is a
secondary address. If disabled, then the IP address corresponding to
this entry is te primary address. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.20 |
| juniIpAdEntUnnumInheritNumIfIndex For unnumbered interfaces, the ifIndex of the IP numbered interface
whose IP address is used as the source IP address for IP packets
transmitted on the unnumbered network.
… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.21 |
| juniIpAdEntNetMask The IP subnet mask associated with the IP address of this entry. The
network and host bit fields of the mask are filled with 1's and 0's,
respectively.
If this ent… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.3 |
| juniIpAdEntBcastAddr The value of the least-significant bit in the IP broadcast address used
for sending datagrams on the IP network interface associated with this
entry. For example, when the Intern… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.4 |
| juniIpAdEntReasmMaxSize The size of the largest IP datagram which this entity can re-assemble
from incoming IP fragmented datagrams received on this interface. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.5 |
| juniIpAdEntRowStatus Controls the creation/deletion of entries in this table according to
the RowStatus textual convention, constrained to support the following
values only:
createAndGo
destro… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.6 |
| juniIpAdEntArpRspEnable Enable/disable ARP response on this IP network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.8 |
| juniIpAdEntProxyArpRspEnable Enable/disable proxy ARP response on this IP network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.12.1.2.2.1.9 |