juniDsx3LineType
Juniper-DS3-MIB ·
.1.3.6.1.4.1.4874.2.2.4.1.1.1.2
Object
column
r/w
Enumeration
This variable indicates the variety of DS3 C-bit or E3 application
implementing this interface. The type of interface affects the
interpretation of the usage and error statistics. The rate of DS3 is
44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means
that the C-bits are not used except for sending/receiving AIS. Note
that this object represents the actual line type when the corresponding
value of dsx3LineType is dsx3other(1).
The values, in sequence, describe:
TITLE: SPECIFICATION:
dsx3M23 ANSI T1.107-1988
dsx3SYNTRAN ANSI T1.107-1988
dsx3CbitParity ANSI T1.107a-1989
dsx3ClearChannel ANSI T1.102-1987
e3G832 ITU-T G.832
e3Framed ITU-T G.751
e3Plcp ETSI T/NA(91)18.
dsx3M23Plcp ATM Forum af-phy-0054.000
dsx3CbitParityPlcp ATM Forum af-phy-0054.000
Context
- MIB
- Juniper-DS3-MIB
- OID
.1.3.6.1.4.1.4874.2.2.4.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniDsx3ConfigEntry
- Table
- juniDsx3ConfigTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | juniDsx3other |
2 | juniDsx3M23 |
3 | juniDsx3SYNTRAN |
4 | juniDsx3CbitParity |
5 | juniDsx3ClearChannel |
6 | juniE3G832 |
7 | juniE3Framed |
8 | juniE3Plcp |
18 | juniDsx3M23Plcp |
20 | juniDsx3CbitParityPlcp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniDsx3LineLength The length of the DS3/E3 line in meters. This objects provides
information for line build out circuitry. This object is only useful if
the interface has configurable line build … | column | meters Integer32 | .1.3.6.1.4.1.4874.2.2.4.1.1.1.1 |
| juniDsx3Ds3DsuMode The DSU configuration setting for this entry. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.4.1.1.1.10 |
| juniDsx3Ds3BandwidthLimit The DSU bandwidth configuration for this entry. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.4.1.1.1.11 |
| juniDsx3Ds3DsuScrambleMode The DSU scramble mode setting for this entry. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.4.1.1.1.12 |
| juniDsx3MdlCarrier Specifies the interface is used in carrier environment. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.4.1.1.1.13 |
| juniDsx3MdlTransmit Specifies transmission enabling. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.4.1.1.1.14 |
| juniDsx3MdlEic This is the equipment identification code. | column | OctetString | .1.3.6.1.4.1.4874.2.2.4.1.1.1.15 |
| juniDsx3MdlLic This is the location identification code. | column | OctetString | .1.3.6.1.4.1.4874.2.2.4.1.1.1.16 |
| juniDsx3MdlFic This is the frame identification code. | column | OctetString | .1.3.6.1.4.1.4874.2.2.4.1.1.1.17 |
| juniDsx3MdlUnit This is the unit identification code. | column | OctetString | .1.3.6.1.4.1.4874.2.2.4.1.1.1.18 |
| juniDsx3MdlPfi This is the facility identification code to send in the MDL path
message. | column | OctetString | .1.3.6.1.4.1.4874.2.2.4.1.1.1.19 |
| juniDsx3MdlPort This is the equipment port number to send in the MDL idle signal
message. | column | OctetString | .1.3.6.1.4.1.4874.2.2.4.1.1.1.20 |
| juniDsx3MdlGenerator This is the generator number to send in the MDL test signal message. | column | OctetString | .1.3.6.1.4.1.4874.2.2.4.1.1.1.21 |
| juniDsx3CellScramblerConfig This variable indicates the state of the ATM cell scrambler for
interfaces which support ATM over DS3 or E3. For interfaces which do
not support ATM, this object returns the valu… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.4.1.1.1.3 |
| juniDsx3Channelization The channelization setting for this DS3 interface; true(1) indicates
channelization, false(2) indicates no channelization. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.4.1.1.1.4 |
| juniDsx3InterfaceType The DS3 interface type setting. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.4.1.1.1.5 |
| juniDsx3Application The interface application setting. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.4.1.1.1.6 |
| juniDsx3Ds3Channel The DS3 channel setting. The range of channel settings depends on the
line rate of the underlying interface. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.4.1.1.1.7 |
| juniDsx3LowerIfIndex The ifIndex of the interface over which this DS3 interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.4.1.1.1.8 |
| juniDsx3RowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support setting the
following values only:
createAndGo
de… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.4.1.1.1.9 |