juniDsx1SendCode
Juniper-DS1-MIB ·
.1.3.6.1.4.1.4874.2.2.5.1.1.1.11
Object
column
r/w
Enumeration
This variable indicates what type of code is being sent across the DS1 interface by the device.
Context
- MIB
- Juniper-DS1-MIB
- OID
.1.3.6.1.4.1.4874.2.2.5.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniDsx1ConfigEntry
- Table
- juniDsx1ConfigTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | sendInbandLineCode |
2 | sendBellcoreLineCode |
3 | sendBellcoreInbandLineCode |
4 | sendQRSPattern |
5 | sendAllZerosPattern |
6 | sendAllOnesPattern |
7 | sendAltZeroOnePattern |
8 | sendTwo11Pattern |
9 | sendTwo15Pattern |
10 | sendTwo20Pattern |
11 | sendTwo23Pattern |
12 | sendUnfrQRSPattern |
13 | sendUnfrAllZerosPattern |
14 | sendUnfrAllOnesPattern |
15 | sendUnfrAltZeroOnePattern |
16 | sendUnfrTwo11Pattern |
17 | sendUnfrTwo15Pattern |
18 | sendUnfrTwo20Pattern |
19 | sendUnfrTwo23Pattern |
20 | otherPattern |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniDsx1TimeSlotMap A bitmap representing the timeslots on the DS1/E1 interface that have
been allocated for service.
For channelized DS1/E1, set bits reflect the union of timeslot
all… | column | Juniper-TCJuniTimeSlotMap | .1.3.6.1.4.1.4874.2.2.5.1.1.1.1 |
| juniDsx1RowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.5.1.1.1.10 |
| juniDsx1YellowAlarm This bitmap indicates the yellow alarm settings, and is the sum of the
capabilities. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.5.1.1.1.12 |
| juniDsx1RemoteLoopback This variable indicates the remote loopback setting. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.5.1.1.1.13 |
| juniDsx1FdlCarrier Specifies the interface is used in carrier environment. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.5.1.1.1.14 |
| juniDsx1FdlEic This is the equipment identification code. | column | OctetString | .1.3.6.1.4.1.4874.2.2.5.1.1.1.15 |
| juniDsx1FdlLic This is the location identification code. | column | OctetString | .1.3.6.1.4.1.4874.2.2.5.1.1.1.16 |
| juniDsx1FdlFic This is the frame identification code. | column | OctetString | .1.3.6.1.4.1.4874.2.2.5.1.1.1.17 |
| juniDsx1FdlUnit This is the unit identification code. | column | OctetString | .1.3.6.1.4.1.4874.2.2.5.1.1.1.18 |
| juniDsx1FdlPfi This is the facility identification code. | column | OctetString | .1.3.6.1.4.1.4874.2.2.5.1.1.1.19 |
| juniDsx1Ds1ChannelNumber This variable represents the channel number of the DS1/E1 on its parent
DS3/E3. A value of 0 indicates this DS1/E1 does not have a parent
DS3/E3. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.5.1.1.1.2 |
| juniDsx1FdlPort This is the equipment port number. | column | OctetString | .1.3.6.1.4.1.4874.2.2.5.1.1.1.20 |
| juniDsx1FdlGenerator This is the generator number. | column | OctetString | .1.3.6.1.4.1.4874.2.2.5.1.1.1.21 |
| juniDsx1FdlTransmit Specifies transmission enabling.
path - Bit 0 for path transmit. When this bit is set
indicates path transmit is enabled; otherwise
path transmit … | column | Bits | .1.3.6.1.4.1.4874.2.2.5.1.1.1.22 |
| juniDsx1Capabilities A value which indicates the set of capabilities of the DS1/E1
interface.
The value is a sum. This sum initially takes the value zero. Then, for
each capability, C… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.5.1.1.1.3 |
| juniDsx1Mode This variable represents the DS1/E1 interface mode. The value of the
juniDsx1Capabilities object for the DS1/E1 interface indicates the valid
set of values for this object. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.5.1.1.1.4 |
| juniDsx1LineBuildOutCapabilities A value which indicates the set of line build out capabilities of the
DS1/E1 interface.
The value is a sum. This sum initially takes the value zero. Then, for
eac… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.5.1.1.1.5 |
| juniDsx1LineBuildOutType This variable represents the configured line build out type of the
DS1/E1 interface. The value of the juniDsx1LineBuildOutCapabilities
object for the DS1/E1 interface indicates t… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.5.1.1.1.6 |
| juniDsx1LineAttenuation This variable represents the configured line attenuation of the DS1/E1
interface. Note that the value of this object only takes effect when
the value of the juniDsx1LineBuildOutT… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.5.1.1.1.7 |
| juniDsx1LineLength This variable represents the length of the DS1/E1 line in meters. Note
that the value of this object only takes effect when the value of the
juniDsx1LineBuildOutType for the DS1/… | column | meters Integer32 | .1.3.6.1.4.1.4874.2.2.5.1.1.1.8 |
| juniDsx1LowerIfIndex The ifIndex of the interface over which this Dsx1 interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.5.1.1.1.9 |