juniBgpVrfResetConnectionType

Juniper-BGP-MIB · .1.3.6.1.4.1.4874.2.2.29.1.18.1.7
MIB view Table view

Object

column r/w JuniBgpResetConnectionType 
Writing a value to this object causes the sessions to all peers in this
VRF to be cleared; the value determines what type of clear is executed
(hard clear, soft clear in, soft clear out, etc.).  Reading this object
has no effect and always returns resetTypeNoop.

Context

MIB
Juniper-BGP-MIB
OID
.1.3.6.1.4.1.4874.2.2.29.1.18.1.7
Type
column
Access
readwrite
Status
current
Parent
juniBgpVrfEntry
Table
juniBgpVrfTable
Siblings
14

Syntax

JuniBgpResetConnectionType
Source
JuniBgpResetConnectionType
Base type
Enumeration

Values & Constraints

Type Values
0resetTypeNoop
1resetTypeHard
2resetTypeSoftIn
3resetTypeSoftOut
4resetTypeSoftInOut
5resetTypeRouteFlapHistory
6resetTypeSoftInWithPrefixOrfPush
7resetTypeWaitEndOfRib
8resetTypeRecreateAllIpDynInterfaces
9resetTypeDynamicPeers

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniBgpVrfName
The name of the VPN Routing Forwarding (VRF) instance.
columnJuniper-TCJuniVrfName.1.3.6.1.4.1.4874.2.2.29.1.18.1.1
juniBgpVrfAddUnicastRoutesToMulticastView
Set this object to true(1) in order to add routes learnt by IPv4 Unicast BGP to the multicast route table.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.29.1.18.1.10
juniBgpVrfMaximumPathsEbgp
The maximum number of routes received from EBGP peers which BGP can select as equal cost. Zero means that routes from EBGP peers cannot be selected as equal cost.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.11
juniBgpVrfMaximumPathsIbgp
The maximum number of routes received from IBGP peers which BGP can select as equal cost. Zero means that routes from IBGP peers cannot be selected as equal cost.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.12
juniBgpVrfUnconfiguredAttributes
On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operationa…
columnBits.1.3.6.1.4.1.4874.2.2.29.1.18.1.13
juniBgpVrfMaximumPathsEIbgp
The maximum number of routes received from both EBGP and IBGP peers which BGP can select as equal cost. Zero means that routes from both EBGP and IBGP peers cannot be selected as…
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.14
juniBgpVrfCarriersCarrierModeEnabled obsolete
Obsolete the BGP carrier's carrier flag since there is no need for it when in carrier's carrier mode.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.29.1.18.1.16
juniBgpVrfSynchronization
Set this object to true(1) in order to have IGP route synchronization enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.29.1.18.1.2
juniBgpVrfAutoSummary
Set this object to true(1) in order to automatically summarize redistributed routes to their natural network mask.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.29.1.18.1.3
juniBgpVrfExternalDistance obsolete
Obsolete administrative distance for external routes. Replaced by juniBgpAddressFamilyExternalDistance.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.4
juniBgpVrfInternalDistance obsolete
Obsolete administrative distance for internal routes. Replaced by juniBgpAddressFamilyInternalDistance.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.5
juniBgpVrfLocalDistance obsolete
Obsolete administrative distance for local routes. Replaced by juniBgpAddressFamilyLocalDistance.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.6
juniBgpVrfRowStatus
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.4874.2.2.29.1.18.1.8
juniBgpVrfOperationalState
The BGP VRF operational state.
columnEnumeration.1.3.6.1.4.1.4874.2.2.29.1.18.1.9