juniAutoConfLockoutMax
Juniper-AUTOCONFIGURE-MIB ·
.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.6
Object
column
r/w
Integer32
The upper bound, in seconds, of the time range used to specify the duration of the lockout of the encapsulation type from recognition for the specified interface. This value must equal or exceed the value for juniAutoConfLockoutMin. This only takes effect if juniAutoConfEnable is set to enable for the encapsulation type for this interface. The ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type is enabled by default. The initial lockout duration is juniAutoConfLockoutMin and increases exponentially for each failure that occurs for the specified encapsulation type for the specified interface within the greater of 15 minutes and this object's value. The lockout duration for the specified encapsulation type will not exceed this object's value. If the time between creation errors for the specified encapsulation type for the specified interface is greater than the greater of 15 minutes and this object's value, then the lockout duration reverts to juniAutoConfigLockoutMin. To disable the ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type for the specified interface, the value of this object and juniAutoConfLockoutMin must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes.
Context
- MIB
- Juniper-AUTOCONFIGURE-MIB
- OID
.1.3.6.1.4.1.4874.2.2.48.1.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniAutoConfEntry
- Table
- juniAutoConfTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAutoConfIfIndex The ifIndex of the interface to which the autoconfiguration information
in this entry applies. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.48.1.1.1.1.1 |
| juniAutoConfEncaps The encapsulated protocol type to which the autoconfiguration
information in this entry applies. | column | JuniAutoConfEncaps | .1.3.6.1.4.1.4874.2.2.48.1.1.1.1.2 |
| juniAutoConfEnable When enabled, permits autoconfiguration of the specified interface when
the specified encapsulation is recognized in an incoming data frame. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.48.1.1.1.1.3 |
| juniAutoConfLockoutSupported Indicates whether lockout is supported for the specified
encapsulation type for the specified interface. If lockout is
supported, then juniAutoConfLockoutMin, juniAutoConfLockout… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.48.1.1.1.1.4 |
| juniAutoConfLockoutMin The lower bound, in seconds, of the time range used to specify
the duration of the lockout of the encapsulation type from
recognition for the specified interface. This only tak… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.48.1.1.1.1.5 |
| juniAutoConfLockoutTime The time duration, in seconds, currently used to lockout the
specified encapsulation type from recognition for the specified
interface. The reported value is within the range spe… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.48.1.1.1.1.7 |
| juniAutoConfLockoutElapsedTime The elapsed time, in seconds, that the specified encapsulation type
has been locked-out from recognition for the specified interface.
Its value will not exceed that of juniAutoCo… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.48.1.1.1.1.8 |
| juniAutoConfNextLockoutTime The time duration, in seconds, that will be used to lockout the
specified encapsulation type from recognition for the specified
interface for the next event that results in a loc… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.48.1.1.1.1.9 |