swJWACVirtualIpAddr
JWAC-MIB ·
.1.3.6.1.4.1.171.12.39.1.9
Object
Specifies the JWAC virtual IP address which is used to accept
authentication requests from an unauthenticated host.
The virtual IP of JWAC is used to accept authentication requests
from an unauthenticated host. Only requests sent to this IP will
get a correct response.
NOTE: This IP does not respond to ARP requests or ICMP packets.
Context
- MIB
- JWAC-MIB
- OID
.1.3.6.1.4.1.171.12.39.1.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- swJWACCtrl
- Siblings
- 19
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swJWACState This object enables/disables the JWAC function.
JWAC and WAC are mutually exclusive functions. That is, they
can not be enabled at the same time.
Using the JWAC functio… | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.1 |
| swJWACQuarantineServerURL Specifies the JWAC Quarantine Server URL.
If the redirect is enabled and the redirect destination is the
Quarantine Server, when an unauthenticated host sends the HTTP
… | scalar | OctetString | .1.3.6.1.4.1.171.12.39.1.10 |
| swJWACSwitchHttpPortNumber Specifies the TCP port which the JWAC Switch listens to and uses
to finish the authenticating process. | scalar | Integer32 | .1.3.6.1.4.1.171.12.39.1.11 |
| swJWACSwitchHttpProtocol Specifies the protocol JWAC will run on this TCP port. | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.12 |
| swJWACRadiusProtocol Specifies the RADIUS protocol used by JWAC to complete a RADIUS
authentication. | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.13 |
| swJWACUpdateServerTable obsolete A table that contains the JWAC Update Server information. | table | - | .1.3.6.1.4.1.171.12.39.1.14 |
| swJWACAuthenticatePage This lets an administrator decide which authentication page
to use.
japanese: Choose the Japanese page;
english: Choose the English page. | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.15 |
| swJWACAuthFailOverState This object enables/disables the web-based authentication auth_failover status
of the device. When the authentication failover is enabled,
if the RADIUS server's authentication i… | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.16 |
| swJWACRadiusAuthorizeState Used to enable or disable the acceptance of an authorized configuration. When the authorization is
enabled for the JWAC RADIUS, the authorized data assigned by the RADUIS server w… | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.17 |
| swJWACLocalAuthorizeState Used to enable or disable the acceptance of an authorized configuration. When the authorization is
enabled for the JWAC local, the authorized data assigned by the local database w… | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.18 |
| swJWACUpdateSVRTable A table that contains JWAC Update Server information. | table | - | .1.3.6.1.4.1.171.12.39.1.19 |
| swJWACRedirectState This object enables/disables the JWAC redirect function.
When the redirect quarantine_server is enabled, the
unauthenticated host will be redirected to the quarantine … | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.2 |
| swJWACVirtualIpURL Used to set the URL for virtual IP | scalar | OctetString | .1.3.6.1.4.1.171.12.39.1.20 |
| swJWACForcibleLogoutState This object enables/disables the JWAC forcible_logout function.
When forcible_logout is enabled, a PING packet from an
authenticated host to the JWAC Switch with TTL=1… | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.3 |
| swJWACUDPFilteringState This object enables/disables the JWAC udp_filtering function.
When udp_filtering is enabled, all UDP and ICMP packets except
DHCP and DNS packets from unauthenticated … | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.4 |
| swJWACQuarantineServerMonitorState This object enables/disables the JWAC Quarantine Server
monitor function.
When enabled, the JWAC Switch will monitor the Quarantine
Server to ensure the server is oka… | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.5 |
| swJWACQuarantineServerErrorTimeOut Used to set the Quarantine Server error timeout.
When the Quarantine Server monitor is enabled, the JWAC Switch will
periodically check if the Quarantine works okay. I… | scalar | Integer32 | .1.3.6.1.4.1.171.12.39.1.6 |
| swJWACRedirectDestination Specifies the destination before an unauthenticated host is
redirected to the Quarantine Server or JWAC login web page. | scalar | Enumeration | .1.3.6.1.4.1.171.12.39.1.7 |
| swJWACRedirectDelayTime Specifies the delay time before an unauthenticated host is
redirected to the Quarantine Server or JWAC login web page.
The unit of delay_time is seconds.
0 means no de… | scalar | Integer32 | .1.3.6.1.4.1.171.12.39.1.8 |