jnxWxGrpEventInFailSafeMode
JUNIPER-WX-EVENT-MIB ·
.1.3.6.1.4.1.2636.3.41.1.1.3.0.7
Object
notification
This trap is sent when the device boots up in fail-safe mode. This can happen for one of the following reasons: Fail-safe reboot was explicitly initiated by the user. The device rebooted automatically too many times because of the failure of internal consistency checks or the failure of tests that verify proper operation of the device.
Context
- MIB
- JUNIPER-WX-EVENT-MIB
- OID
.1.3.6.1.4.1.2636.3.41.1.1.3.0.7- Type
- notification
- Status
- current
- Parent
- jnxWxGrpEventV2
- Siblings
- 11
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxWxGrpEventPowerSupplyFailure One or more sources of power to the system have failed.
A redundant power-supply has presumably taken over. | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.1 |
| jnxWxGrpEventInterfaceDuplexMismatch A possible mismatch was detected between the duplex settings
of either the local or remote interface and that of the
device attached to that interface. The interface (local
or rem… | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.10 |
| jnxWxGrpEventLoginFailure A user's login attempt via the console/ssh/web server
failed due to incorrect username or password. | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.11 |
| jnxWxGrpEventDiskFailure A hard disk failed on the system. The system was rebooted,
and will now operate without the downed disk, at a degraded
performance. Dictionary accumulated until this point was los… | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.12 |
| jnxWxGrpEventPowerSupplyOk One or more previously failed sources of power is now
working normally. The transition to normal condition happened
without the system having to be restarted. | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.2 |
| jnxWxGrpEventLicenseWillExpire The license for the system is about to
expire shortly. When it eventually does
expire, the system will switch over to
and stay in pass-through mode. | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.3 |
| jnxWxGrpEventThruputLimitExceeded The throughput of traffic through the device
has exceeded the limit for which it has
been licensed. | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.4 |
| jnxWxGrpEventLicenseExpired The license for the system expired.
As a result, the system will switch over to
and stay in pass-through mode. | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.5 |
| jnxWxGrpEventClientLimitExceeded Exceeded licensed maximum concurrent client connections.
Please contact Juniper Networks to obtain a new license
with higher number of concurrent client connections. | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.6 |
| jnxWxGrpEventInterfaceSpeedMismatch A mismatch is detected between the local and remote
interface settings. This can happen due to a mismatch
in the local and remote interface speed or mode. | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.8 |
| jnxWxGrpEventInterfaceSpeedOk A mismatch previously detected between the local and remote
interface settings is now resolved. The local and remote
interface speed and mode are matched. | notification | - | .1.3.6.1.4.1.2636.3.41.1.1.3.0.9 |