jnxSoamLmThresholdCfgEnable

JUNIPER-SOAM-PM-MIB · .1.3.6.1.4.1.2636.3.78.1.2.5.1.2
MIB view Table view

Object

column Bits 
A vector of bits that indicates the type of SOAM LM thresholds
notifications that are enabled.
              
A bit set to '1' enables the specific SOAM LM threshold notification
and when the specific counter is enabled and the threshold is crossed a
notification is generated.
              
A bit set to '0' disables the specific SOAM LM threshold notification.
              
If a particular SOAM LM threshold is not supported the BIT value is
set to '0'.
              
bJnxSoamLmMeasuredFlrForwardThreshold(0)
Enables/disables measured frame loss forward ratio threshold
notification. The notification is sent immediately when the
jnxSoamLmMeasuredStatsForwardFlr value is
greater than or equal to the threshold value.
bJnxSoamLmMaxFlrForwardThreshold(1)
Enables/disables maximum frame loss forward ratio threshold
notification. The notification is sent immediately when the
jnxSoamLmCurrentStatsForwardMaxFlr value is greater
than or equal to threshold value in a Measurement Interval.
bJnxSoamLmAvgFlrForwardThreshold(2)
Enables/disables average frame loss forward ratio threshold
notification. The notification is sent when at the end of a
Measurement Interval if the
jnxSoamLmCurrentStatsForwardAvgFlr value is greater
than or equal to the threshold value.
bJnxSoamLmMeasuredFlrBackwardThreshold(3)
Enables/disables measured frame loss backward ratio threshold
notification. The notification is sent immediately when the
jnxSoamLmMeasuredStatsBackwardFlr value is
greater than or equal to the threshold value.
bJnxSoamLmMaxFlrBackwardThreshold(4)
Enables/disables maximum frame loss backward ratio threshold
notification. The notification is sent immediately when the
jnxSoamLmCurrentStatsBackwardMaxFlr value is greater
than or equal to threshold value in a Measurement Interval.
bJnxSoamLmAvgFlrBackwardThreshold(5)
Enables/disables average frame loss backward ratio threshold
notification. The notification is sent when at the end of a
Measurement Interval if the
jnxSoamLmCurrentStatsBackwardAvgFlr value is
greater than or equal to the threshold value.

Context

MIB
JUNIPER-SOAM-PM-MIB
OID
.1.3.6.1.4.1.2636.3.78.1.2.5.1.2
Type
column
Access
readonly
Status
current
Parent
jnxSoamLmThresholdCfgEntry
Table
jnxSoamLmThresholdCfgTable
Siblings
4

Syntax

Bits

Values & Constraints

Enumerated Values
0bJnxSoamLmMeasuredFlrForwardThreshold
1bJnxSoamLmMaxFlrForwardThreshold
2bJnxSoamLmAvgFlrForwardThreshold
3bJnxSoamLmMeasuredFlrBackwardThreshold
4bJnxSoamLmMaxFlrBackwardThreshold
5bJnxSoamLmAvgFlrBackwardThreshold

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
jnxSoamLmThresholdCfgIndex
The index of the threshold number for the specific LM threshold entry. An index value of '1' needs to be supported. Other index values can also be supported.
columnUnsigned32.1.3.6.1.4.1.2636.3.78.1.2.5.1.1
jnxSoamLmThresholdCfgAvgFlrForwardThreshold
This object is used to set the average forward frame loss ratio threshold value that will be used to determine if a threshold notification is generated.
columnmilli-percent Unsigned32.1.3.6.1.4.1.2636.3.78.1.2.5.1.3
jnxSoamLmThresholdCfgAvgFlrBackwardThreshold
This object is used to set the average backward frame loss ratio threshold value that will be used to determine if a threshold notification is generated.
columnmilli-percent Unsigned32.1.3.6.1.4.1.2636.3.78.1.2.5.1.4
jnxSoamLmThresholdCfgRowStatus
The status of the row. The writable columns in a row cannot be changed if the row is active. All columns are to have a valid value before a row can be activated.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2636.3.78.1.2.5.1.5